strykeforce/thirdcoast-grapher

Issues

• Remove scrolling for scale adjustment

  #15 opened 5 years ago by rkalnins
  0

• Allow manual entering of time range

  #14 opened 6 years ago by rabsamu
  0

• Fix spacing on parameter names

  #13 opened 6 years ago by rabsamu
  0

• add instructions-for-use in the labview front panel window(s)

  #11 opened 7 years ago by rabsamu
  1

• Grapher needs a 5th Y axis

  #12 opened 7 years ago by jcul3351
  1

• Folder the configurations are saved in

  #7 opened 7 years ago by jcul3351
  1

• Digital readout on the Grapher page

  #4 opened 7 years ago by jcul3351
  1

• X axis readout

  #9 opened 7 years ago by jcul3351
  1

• Selection Windows when the Grapher fires up

  #2 opened 7 years ago by jcul3351
  1

• Exit Application button doesn't exit the application

  #1 opened 7 years ago by jhh
  1

• Save configuration does not same the X axis scaling

  #10 opened 7 years ago by jcul3351
  0

• Port selectioon when the grapher fires up

  #8 opened 7 years ago by jcul3351
  0

• Graph line and dot colors

  #6 opened 7 years ago by jcul3351
  0

• Autoscaling

  #5 opened 7 years ago by jcul3351
  0

• Grapher Y axis

  #3 opened 7 years ago by jcul3351
  0