/gor

HTTP traffic replay in real-time. Replay traffic from production to staging and dev environments.

Primary LanguageGoApache License 2.0Apache-2.0

Build Status

About

Gor is a simple http traffic replication tool written in Go. Its main goal is to replay traffic from production servers to staging and dev environments.

Now you can test your code on real user sessions in an automated and repeatable fashion. No more falling down in production!

Here is basic workflow: The listener server catches http traffic and sends it to the replay server or saves to file. The replay server forwards traffic to a given address.

Diagram

Examples

Capture traffic from port

# Run on servers where you want to catch traffic. You can run it on each `web` machine.
sudo gor --input-raw :80 --output-tcp replay.local:28020

# Replay server (replay.local).
gor --input-tcp replay.local:28020 --output-http http://staging.com

Since Gor use raw sockets to capture traffic it require sudo access. Alternatively you can allow access to raw sockets like this: sudo setcap CAP_NET_RAW=ep gor

Using 1 Gor instance for both listening and replaying

It's recommended to use separate server for replaying traffic, but if you have enough CPU resources you can use single Gor instance.

sudo gor --input-raw :80 --output-http "http://staging.com"

Guarantee of replay and HTTP input

Due to how traffic interception works, there is chance of missing requests. If you want guarantee that requests will be replayed you can use http input, but it will require changes in your app as well.

sudo gor --input-http :28019 --output-http "http://staging.com"

Then in your application you should send copy (e.g. like reverse proxy) all incoming requests to Gor http input.

Configuration

Forward to multiple addresses

You can forward traffic to multiple endpoints. Just add multiple --output-* arguments.

gor --input-tcp :28020 --output-http "http://staging.com"  --output-http "http://dev.com"

Splitting traffic

By default it will send same traffic to all outputs, but you have options to equally split it:

gor --input-tcp :28020 --output-http "http://staging.com"  --output-http "http://dev.com" --split-output true

HTTP output workers

By default Gor creates dynamic pull of workers: it starts with 10 and create more http output workers when the http output queue length is greater than 10. The number of workers created (N) is equal to the queue length at the time which it is checked and found to have a length greater than 10. The queue length is checked every time a message is written to the http output queue. No more workers will be spawned until that request to spawn N workers is satisfied. If a dynamic worker cannot process a message at that time, it will sleep for 100 milliseconds. If a dynamic worker cannot process a message for 2 seconds it dies.
You may specify fixed number of workers using --output-http-workers=20 option.

Follow redirects

By default Gor will ignore all redirects since they are handled by clients using your app, but in scenarios when your replayed environment introduce new redirects, you can enable them like this:

gor --input-tcp replay.local:28020 --output-http http://staging.com --output-http-redirects 2

The given example will follow up to 2 redirects per request.

HTTP timeouts

By default http timeout for both request and response is 5 seconds. You can override it like this:

gor --input-tcp replay.local:28020 --output-http http://staging.com --output-http-timeout 30s

Rate limiting

Rate limiting can be useful if you want forward only part of production traffic and not overload your staging environment. There is 2 strategies: dropping random requests or dropping fraction of requests based on Header or URL param value.

Dropping random requests

Every input and output support random rate limiting. There are 2 limiting algorithms: absolute or percentage based.

Absolute: If for current second it reached specified requests limit - disregard the rest, on next second counter reseted.

Percentage: For input-file it will slowdown or speedup request execution, for the rest it will use random generator to decide if request pass or not based on chance you specified.

You can specify your desired limit using the "|" operator after the server address:

Limiting replay using absolute number

# staging.server will not get more than 10 requests per second
gor --input-tcp :28020 --output-http "http://staging.com|10"

Limiting listener using percentage based limiter

# replay server will not get more than 10% of requests 
# useful for high-load environments
gor --input-raw :80 --output-tcp "replay.local:28020|10%"

Limiting based on Header or URL param value

If you have unique user id (like API key) stored in header or URL you can consistently forward specified percent of traffic only for fraction of this users. Basic formula looks like this: FNV32-1A_hashing(value) % 100 >= chance. Examples:

# Limit based on header value
gor --input-raw :80 --output-tcp "replay.local:28020|10%" --http-header-limiter "X-API-KEY: 10%"

# Limit based on header value
gor --input-raw :80 --output-tcp "replay.local:28020|10%" --http-param-limiter "api_key: 10%"

Only percentage based limiting supported.

Filtering

Allow url regexp

# only forward requests being sent to the /api endpoint
gor --input-raw :8080 --output-http staging.com --http-allow-url /api

Disallow url regexp

# only forward requests NOT being sent to the /api... endpoint
gor --input-raw :8080 --output-http staging.com --http-disallow-url /api

Filter based on regexp of header

# only forward requests with an api version of 1.0x
gor --input-raw :8080 --output-http staging.com --http-allow-header api-version:^1\.0\d

# only forward requests NOT containing User-Agent header value "Replayed by Gor"
gor --input-raw :8080 --output-http staging.com --http-disallow-header "User-Agent: Replayed by Gor"

Filter based on http method

Requests not matching a specified whitelist can be filtered out. For example to strip non-nullipotent requests:

gor --input-raw :80 --output-http "http://staging.server" \
    --http-allow-method GET \
    --http-allow-method OPTIONS

Rewriting original request

Gor supports built-in basic rewriting support, for complex logic see buger#162

Rewrite URL based on a mapping

# rewrite url to match the following
gor --input-raw :8080 --output-http staging.com --http-rewrite-url /v1/user/([^\\/]+)/ping:/v2/user/$1/ping

Set URL param

Set request url param, if param already exists it will be overwritten

gor --input-raw :8080 --output-http staging.com --http-set-param api_key=1

Set Header

Set request header, if header already exists it will be overwritten. This may be useful if you need to identify requests generated by Gor or enable feature flagged functionality in an application:

gor --input-raw :80 --output-http "http://staging.server" \
    --http-header "User-Agent: Replayed by Gor" \
    --http-header "Enable-Feature-X: true"

Host header

Host header gets special treatment. By default Host get set to the value specified in --output-http. If you manually set --http-header "Host: anonther.com", Gor will not override Host value.

If you app accepts traffic from multiple domain, and you want to keep original headers, there is specific --http-original-host with tells Gor do not touch Host header at all.

Saving requests to file and replaying them

You can save requests to file, and replay them later:

# write to file
gor --input-raw :80 --output-file requests.gor

# read from file
gor --input-file requests.gor --output-http "http://staging.com"

Note: Replay will preserve the original time differences between requests.

Load testing

Currently it supported only by input-file and only when using percentage based limiter. Unlike default limiter for input-file instead of dropping requests it will slowdown or speedup request emitting. Note that unlike examples above limiter is applied to input:

# Replay from file on 2x speed 
gor --input-file "requests.gor|200%" --output-http "staging.com"

Basic Auth

If your development or staging environment is protected by Basic Authentication then those credentials can be injected in during the replay:

gor --input-raw :80 --output-http "http://user:pass@staging .com"

Note: This will overwrite any Authorization headers in the original request.

Stats

Gor can report stats on the output-tcp and output-http request queues. Stats are reported to the console every 5 seconds in the form latest,mean,max,count,count/second by using the --output-http-stats and --output-tcp-stats options.

Examples:

2014/04/23 21:17:50 output_tcp:latest,mean,max,count,count/second
2014/04/23 21:17:50 output_tcp:0,0,0,0,0
2014/04/23 21:17:55 output_tcp:1,1,2,68,13
2014/04/23 21:18:00 output_tcp:1,1,2,92,18
2014/04/23 21:18:05 output_tcp:1,1,2,119,23
Version: 0.8
2014/04/23 21:19:46 output_http:latest,mean,max,count,count/second
2014/04/23 21:19:46 output_http:0,0,0,0,0
2014/04/23 21:19:51 output_http:0,0,0,0,0
2014/04/23 21:19:56 output_http:0,0,0,0,0
2014/04/23 21:20:01 output_http:1,0,1,50,10
2014/04/23 21:20:06 output_http:1,1,4,72,14
2014/04/23 21:20:11 output_http:1,0,1,179,35
2014/04/23 21:20:16 output_http:1,0,1,148,29
2014/04/23 21:20:21 output_http:1,1,2,91,18
2014/04/23 21:20:26 output_http:1,1,2,150,30
2014/04/23 21:18:15 output_http:100,99,100,70,14
2014/04/23 21:18:21 output_http:100,99,100,55,11

How can I tell if I have bottlenecks?

Key areas that sometimes experience bottlenecks are the output-tcp and output-http functions which have internal queues for requests. Each queue has an upper limit of 100. Enable stats reporting to see if any queues are experiencing bottleneck behavior.

output-http bottlenecks

When running a Gor replay the output-http feature may bottleneck if:

  • the replay has inadequate bandwidth. If the replay is receiving or sending more messages than its network adapter can handle the output-http-stats may report that the output-http queue is filling up. See if there is a way to upgrade the replay's bandwidth.
  • with --output-http-workers set to anything other than -1 the -output-http target is unable to respond to messages in a timely manner. The http output workers which take messages off the output-http queue, process the request, and ensure that the request did not result in an error may not be able to keep up with the number of incoming requests. If the replay is not using dynamic worker scaling (--output-http-workers=-1) The optimal number of output-http-workers can be determined with the formula output-workers = (Average number of requests per second)/(Average target response time per second).

output-tcp bottlenecks

When using the Gor listener the output-tcp feature may bottleneck if:

  • the replay is unable to accept and process more requests than the listener is able generate. Prior to troubleshooting the output-tcp bottleneck, ensure that the replay target is not experiencing any bottlenecks.
  • the replay target has inadequate bandwidth to handle all its incoming requests. If a replay target's incoming bandwidth is maxed out the output-tcp-stats may report that the output-tcp queue is filling up. See if there is a way to upgrade the replay's bandwidth.

ElasticSearch

For deep response analyze based on url, cookie, user-agent and etc. you can export response metadata to ElasticSearch. See ELASTICSEARCH.md for more details.

gor --input-tcp :80 --output-http "http://staging.com" --output-http-elasticsearch "es_host:api_port/index_name"

Additional help

Feel free to ask question directly by email or by creating github issue.

Latest releases (including binaries)

https://github.com/buger/gor/releases

Command line reference

gor -h output:

  -http-allow-header=[]: A regexp to match a specific header against. Requests with non-matching headers will be dropped:
   gor --input-raw :8080 --output-http staging.com --http-allow-header api-version:^v1
  -http-disallow-header=[]: A regexp to match a specific header against. Requests with matching headers will be dropped:
   gor --input-raw :8080 --output-http staging.com --http-disallow-header "User-Agent: Replayed by Gor"
  -http-allow-method=[]: Whitelist of HTTP methods to replay. Anything else will be dropped:
  gor --input-raw :8080 --output-http staging.com --http-allow-method GET --http-allow-method OPTIONS
  -http-allow-url=[]: A regexp to match requests against. Filter get matched agains full url with domain. Anything else will be dropped:
   gor --input-raw :8080 --output-http staging.com --http-allow-url ^www.
  -http-diallow-url=[]: A regexp to match requests against. Filter get matched agains full url with domain. Anything else will be dropped:
   gor --input-raw :8080 --output-http staging.com --http-disallow-url ^www.
  -http-header-limiter=[]: Takes a fraction of requests, consistently taking or rejecting a request based on the FNV32-1A hash of a specific header:
   gor --input-raw :8080 --output-http staging.com --http-header-imiter user-id:25%
  -http-param-limiter=[]: Takes a fraction of requests, consistently taking or rejecting a request based on the FNV32-1A hash of a specific GET param:
   gor --input-raw :8080 --output-http staging.com --http-param-limiter user_id:25%
  -http-rewrite-url=[]: Rewrite the request url based on a mapping:
  gor --input-raw :8080 --output-http staging.com --http-rewrite-url /v1/user/([^\/]+)/ping:/v2/user/$1/ping
  -http-set-header=[]: Inject additional headers to http reqest:
  gor --input-raw :8080 --output-http staging.com --http-set-header 'User-Agent: Gor'
  -http-set-param=[]: Set request url param, if param already exists it will be overwritten:
  gor --input-raw :8080 --output-http staging.com --http-set-param api_key=1
  -input-dummy=[]: Used for testing outputs. Emits 'Get /' request every 1s
  -input-file=[]: Read requests from file:
  gor --input-file ./requests.gor --output-http staging.com
  -input-http=[]: Read requests from HTTP, should be explicitly sent from your application:
  # Listen for http on 9000
  gor --input-http :9000 --output-http staging.com
  -input-raw=[]: Capture traffic from given port (use RAW sockets and require *sudo* access):
  # Capture traffic from 8080 port
  gor --input-raw :8080 --output-http staging.com
  -input-tcp=[]: Used for internal communication between Gor instances. Example:
  # Receive requests from other Gor instances on 28020 port, and redirect output to staging
  gor --input-tcp :28020 --output-http staging.com
  -memprofile="": write memory profile to this file
  -output-dummy=[]: Used for testing inputs. Just prints data coming from inputs.
  -output-file=[]: Write incoming requests to file:
  gor --input-raw :80 --output-file ./requests.gor
  -output-http=[]: Forwards incoming requests to given http address.
  # Redirect all incoming requests to staging.com address
  gor --input-raw :80 --output-http http://staging.com
  -output-http-elasticsearch="": Send request and response stats to ElasticSearch:
  gor --input-raw :8080 --output-http staging.com --output-http-elasticsearch 'es_host:api_port/index_name'
  -output-http-header-filter=[]: WARNING: `--output-http-header-filter` DEPRECATED, use `--http-allow-header` instead  -output-http-redirects=0: Enable how often redirects should be followed.
  -output-http-stats=false: Report http output queue stats to console every 5 seconds. Remember to include also `--stats`
  -output-http-workers=0: Gor uses dynamic worker scaling by default.  Enter a number to run a set number of workers.
  -output-tcp=[]: Used for internal communication between Gor instances. Example:
  # Listen for requests on 80 port and forward them to other Gor instance on 28020 port
  gor --input-raw :80 --output-tcp replay.local:28020
  -output-tcp-stats=false: Report TCP output queue stats to console every 5 seconds. Remember to include also `--stats`
  -split-output=false: By default each output gets same traffic. If set to `true` it splits traffic equally among all outputs.
  -stats=false: Turn on queue stats output. Use in combination with the other *-stats flags.
  -verbose=false: Turn on verbose/debug output

Building from source

  1. Setup standard Go environment http://golang.org/doc/code.html and ensure that $GOPATH environment variable properly set.
  2. go get github.com/buger/gor.
  3. cd $GOPATH/src/github.com/buger/gor
  4. go build to get binary, or go test to run tests

Development

Project contains Docker environment.

  1. Build container: make dbuild
  2. Run all tests: make dtest. Run specific test: make dtest ARGS=-test.run=**regexp**
  3. Bash access to container: make dbash. Inside container you have python to run simple web server python -m SimpleHTTPServer 8080 and curl to make http requests.

Questions and support

All bug-reports and suggestions should go though Github Issues or our Google Group. Or you can just send email to gor-users@googlegroups.com

If you have some private questions you can send direct mail to leonsbox@gmail.com

FAQ

What OS are supported?

For now only Linux based. *BSD (including MacOS is not supported yet, check buger#22 for details)

Why does the --input-raw requires sudo or root access?

Listener works by sniffing traffic from a given port. It's accessible only by using sudo or root access.

How do you deal with user session to replay the traffic correctly?

You can rewrite session related headers/params to match your staging environment. If you require custom logic (e.g random token based auth) follow this discussion: buger#154

Can i use Gor to intercept SSL traffic?

Basic idea is that SSL was made to protect itself from traffic interception. There 2 options:

  1. Move SSL handling to proxy like Nginx or Amazon ELB. And allow Gor to listen on upstreams.
  2. Use --input-http so you can duplicate request payload directly from your app to Gor, but it will require your app modifications.

More can be find here: buger#85

Is there a limit for size of HTTP request when using output-http?

Due to the fact that Gor can't guarantee interception of all packets, for large payloads > 200kb there is chance of missing some packets and corrupting body. Treat it as a feature and chance to test broken bodies handling :) The only way to guarantee delivery is using --input-http, but you will miss some features.

I'm getting 'too many open files' error

Typical linux shell has a small open files soft limit at 1024. You can easily raise that when you do this before starting your gor replay process:

ulimit -n 64000

More about ulimit: http://blog.thecodingmachine.com/content/solving-too-many-open-files-exception-red5-or-any-other-application

The CPU average across my load-balanced targets is higher than the source

If you are replaying traffic from multiple listeners to a load-balanced target and you use sticky sessions, you may observe that the target servers have a higher CPU load than the listener servers. This may be because the sticky session cookie of the original load balancer is not honored by the target load balancer thus resulting in requests that would normally hit the same target server hitting different servers on the backend thus reducing some caching benefits gained via the load balancing. Try running just one listener against one replay target and see if the CPU utilization comparison is more accurate.

Tuning

To achieve the top most performance you should tune the source server system limits:

net.ipv4.tcp_max_tw_buckets = 65536
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 0
net.ipv4.tcp_max_syn_backlog = 131072
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_synack_retries = 3
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 8
net.ipv4.tcp_rmem = 16384 174760 349520
net.ipv4.tcp_wmem = 16384 131072 262144
net.ipv4.tcp_mem = 262144 524288 1048576
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_low_latency = 1
net.ipv4.tcp_syncookies = 0

Contributing

  1. Fork it
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Added some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create new Pull Request

Companies using Gor