synfinatic/teensy-dsc

Issues

• RN-XV not getting configured

  #47 opened 7 years ago by BVIS222
  6

• Negative encoder resolutions are broken

  #46 opened 7 years ago by synfinatic
  2

• HTTP Config

  #25 opened 10 years ago by synfinatic
  1

• Multi-star alignment for better accuracy

  #45 opened 7 years ago by synfinatic
  0

• Switch WiFi solution?

  #22 opened 10 years ago by synfinatic
  5

• Switch to QuadEncoder library

  #36 opened 10 years ago by synfinatic
  1

• support Dave Ek's Files DSC protocol

  #1 opened 10 years ago by synfinatic
  1

• SkyCommander/Orion Inteliscope functionality

  #7 opened 10 years ago by synfinatic
  5

• Improve WiFly config CLI

  #44 opened 10 years ago by synfinatic
  0

• Build code using included libraries

  #43 opened 10 years ago by synfinatic
  0

• USB Host mode

  #2 opened 10 years ago by synfinatic
  0

• Rework project to include libraries in source tree

  #41 opened 10 years ago by synfinatic
  1

• SkySafari hangs for ~1sec

  #38 opened 10 years ago by synfinatic
  1

• Fix 'mode wifi'

  #28 opened 10 years ago by synfinatic
  0

• Dew heater controller?

  #19 opened 10 years ago by synfinatic
  0

• Add support for alignment flag

  #42 opened 10 years ago by synfinatic
  0

• "Test Mode"

  #40 opened 10 years ago by synfinatic
  0

• Encoder counters are wrong?

  #39 opened 10 years ago by synfinatic
  0

• Equatorial Platform Driver

  #23 opened 10 years ago by synfinatic
  1

• Account for mount errors

  #37 opened 10 years ago by synfinatic
  1

• Support BBox protocol

  #34 opened 10 years ago by synfinatic
  0

• WiFly factory reset command

  #27 opened 10 years ago by synfinatic
  1

• Support faster WiFly serial baud rates

  #26 opened 10 years ago by synfinatic
  0

• WiFi to USB serial bridge

  #9 opened 10 years ago by synfinatic
  0

• Add support for Orion Intelliscope encoders

  #31 opened 10 years ago by synfinatic
  0

• Link external USB port to Teensy USB

  #35 opened 10 years ago by synfinatic
  0

• Dewpoint alarm

  #13 opened 10 years ago by synfinatic
  0

• LED status light / power button?

  #14 opened 10 years ago by synfinatic
  0

• Create Youtube video of how to install & configure the software

  #30 opened 10 years ago by synfinatic
  0

• Nexus-S parity

  #29 opened 10 years ago by synfinatic
  1

• come up with a better project name

  #6 opened 10 years ago by synfinatic
  0

• Mike Fullbright's DSC commands

  #18 opened 10 years ago by synfinatic
  2

• Support AstroDevices/Nexus protocol

  #33 opened 10 years ago by synfinatic
  2

• Design PCB around enclosure

  #16 opened 10 years ago by synfinatic
  2

• Configure Teensy-DSC

  #20 opened 10 years ago by synfinatic
  0

• OKI module doesn't fit in 0.5.3 board

  #32 opened 10 years ago by synfinatic
  1

• Encoder hold-down

  #4 opened 10 years ago by synfinatic
  1

• Factory Reset button

  #24 opened 10 years ago by synfinatic
  1

• Use EEPROM for config

  #12 opened 10 years ago by synfinatic
  0

• Tracking/GoTo stepper motor support

  #21 opened 10 years ago by synfinatic
  0

• Support additional DSC command sets

  #10 opened 10 years ago by synfinatic
  0

• WiFly setup

  #11 opened 10 years ago by synfinatic
  1

• WiFly GPIO pins

  #17 opened 10 years ago by synfinatic
  1

• Rewrite WiFlySerial?

  #15 opened 10 years ago by synfinatic
  1

• Basic DSC Support

  #3 opened 10 years ago by synfinatic
  1

• WiFi to Serial bridge

  #8 opened 10 years ago by synfinatic
  0

• Add support for 12V

  #5 opened 10 years ago by synfinatic
  0