Issues
- 3
New Firmware based on Creality Firmware version Ender-3 S1_Pro_HWv24S1_301_SWV2.0.8.28F4_F401_FDM_LASER
#63 opened by DDdotDE - 0
Enable directory structure for gcode files
#68 opened by marekvse - 1
ABL fails\hangs
#67 opened by LoneSimba - 2
Z babystep bug
#61 opened by aerladis - 0
[question] editing config in this bundle
#64 opened by JeremieANACHE - 0
- 2
Make firmwares open source
#59 opened by wirelessnet2 - 0
- 28
Unable to run automatic bed leveling
#50 opened by RedFoxy - 7
- 1
ABL Bed temps with Octo4a
#51 opened by scarbonarra - 39
Laser mode
#8 opened by IAGITH - 0
Ender 3 S1 F4
#57 opened by StripeShow - 0
Enable SAVED_POSITIONS G60/61
#54 opened by mlebaugh - 12
Cannot continue printing after a pause
#44 opened by synman - 6
Ender 3S1 Plus with touch screen issues a confirmation but without one on the screen
#46 opened by pronchakov - 0
showing the wrong version in Display?
#48 opened by beroliv - 1
Prints outside of the bed
#45 opened by Adam7772 - 13
Z Offset Raise Limitation.
#42 opened by ActiveAdminDirectory - 6
Noticed bugs
#41 opened by Zharkoviv - 4
odd problem with M73. When printing via USB, the %age jumps to 100% then back to the expected %age.
#39 opened by synman - 3
Enable SOUND
#9 opened by synman - 3
Increase max bed temp via LCD
#15 opened by synman - 7
abl offcenter
#7 opened by IAGITH - 5
Invalid mesh
#30 opened by NicolasZorzettig - 4
Change Z-Offset rate from .05mm to .01mm
#6 opened by synman - 5
Second print in a row fails
#37 opened by lipa46 - 24
Request "M425 - Backlash compensation" enabled
#33 opened by MrDB42 - 7
Z offset to 0.04
#35 opened by IAGITH - 11
changing z offset error while printing
#34 opened by dodolcool - 5
UBL 100 Fails at point 28 - F4-s1pro - Octoprint
#32 opened by MrDB42 - 1
Feedback needed for "F1" SoC owners
#3 opened by synman - 2
M73 - Set Print Progress
#29 opened by synman - 8
MANUALL_BED_LEVEING_5POSITION tweaks
#26 opened by ThomasToka - 9
- 16
Linear Advance Support
#11 opened by synman - 1
Filament change workflow
#5 opened by synman - 4
Trying to use UBL?
#13 opened by synman - 2
Input Shaping
#17 opened by synman - 7
CHOPPER_TIMING CHOPPER_DEFAULT 12V or 24V
#18 opened by ThomasToka - 3
- 21
Adjust bed size and offsets
#4 opened by synman - 0
ABL is broke in latest build
#14 opened by synman - 2
Find a place for M117 messages
#10 opened by synman - 4
Ender 3 S1 version is feasible?
#1 opened by sdbruder - 2
compile warning M300.cpp
#12 opened by ThomasToka