Issues
- 2
- 2
- 4
- 2
- 1
Requesting updated BIOS for Thelio-R2
#54 opened by soupcan97 - 1
Thelio case ports need visual contrast so they can be found in dim light.
#12 opened by eric-s-raymond - 4
https://thel.io/ Link in description is dead
#16 opened by magdesign - 1
create drawing binder for thelio workstations
#46 opened by CaryHertert - 1
Prototype Build 3
#49 opened by CaryHertert - 0
- 0
Change chassis brace to 316.5mm width, correct offset from side of chassis, make new production part MRAALU_008006
#51 opened by jgrano - 0
create subassembly drawings
#44 opened by CaryHertert - 0
upload drawings to github
#45 opened by CaryHertert - 0
Create component drawings
#43 opened by CaryHertert - 1
Vacuum table for the G2.
#36 opened by jgrano - 1
Mylar bags for veneer
#38 opened by CaryHertert - 4
Cut Prototype # 2
#39 opened by jgrano - 9
Thermal Testing on Major V3 Chassis
#40 opened by jgrano - 0
Thelio V3R2
#41 opened by CaryHertert - 0
CNC router to test fiber cutting.
#34 opened by jgrano - 1
Update all GitHub Repos
#35 opened by jgrano - 1
Bead rolling for increased rigidity.
#32 opened by jgrano - 1
Veneer cutting on the large CNC table.
#33 opened by jgrano - 0
New GPU Brace
#24 opened by jgrano - 1
Rear port legend etching.
#26 opened by jgrano - 0
Test new GPU brace. The current quad GPU brace was found to improve thermal performance with four GPUs. Ensure there is no regression before implementing the new brace.
#25 opened by jgrano - 0
Rear port legend etching.
#28 opened by jgrano - 3
Replace Rivnuts, perhaps with pemcerts.
#29 opened by jgrano - 0
BOM (Bill of Materials) is Missing Thelio-R2
#18 opened by Castle-Oak - 5
New top case brace
#20 opened by jgrano - 2
CPU Duct - Move fan down 5mm for thermal testing
#21 opened by jgrano - 0
Rear port legend etching.
#23 opened by jgrano - 3
- 1
- 2
Thelio V3R2 - 2 piece chassis
#42 opened by CaryHertert - 1
prototype build 2
#48 opened by CaryHertert - 3
ThelioV3 Prototype Revisions:
#47 opened by CaryHertert - 2
Prototype new silicone feet
#37 opened by jgrano - 1
New External Case design/assembly method
#31 opened by jgrano - 7
Rear port legend etching.
#22 opened by jgrano - 5
- 8
- 5
Thelio case quality after one year of usage
#15 opened by magdesign - 1
- 0
New jig for bottom panel
#2 opened by sarahpandabeara - 5
- 4
- 3
- 2
- 1