taborlab/LPA-hardware

Issues

• Abnormal behavior after programming

  #39 opened 2 years ago by ri-zhou
  4

• Microcontoller availability

  #38 opened 3 years ago by lanmasterlan
  3

• Programming issues

  #37 opened 3 years ago by morphogenetic2
  5

• How was such a low initial coefficient of variation of 7.78% achieved in LED Calibration?

  #36 opened 5 years ago by ramininaieni
  3

• Gerber file for stencil not included in production files

  #26 opened 5 years ago by KarlGerhardt
  2

• Long Runtime error - Intensity of Lights Change Over Time on Steady State Program

  #34 opened 5 years ago by ramininaieni
  3

• Other potential 24 well TC treated plates to use with LPA?

  #35 opened 5 years ago by ramininaieni
  2

• Replace oscillator capacitors in parts list

  #28 opened 5 years ago by castillohair
  0

• problem with 96 well LPA

  #23 opened 7 years ago by HMoerten
  6

• Control LPA via SPI

  #33 opened 6 years ago by tlnagy
  3

• SD card not recognized by LPA

  #32 opened 6 years ago by GolgiWhillikers
  6

• Remove stepSizeScaling from firmware code

  #31 opened 6 years ago by castillohair
  1

• Improve firmware documentation

  #29 opened 6 years ago by castillohair
  0

• 12pF Capacitor

  #27 opened 6 years ago by phuongho43
  3

• Replace included cytometry tube rack

  #30 opened 6 years ago by castillohair
  0

• Add documentation based on SI text

  #2 opened 9 years ago by castillohair
  1

• SD card socket

  #25 opened 6 years ago by kleagsand
  1

• Outsourced Soldering questions

  #24 opened 7 years ago by cuong450
  1

• LED orientation to plug into sockets

  #21 opened 7 years ago by cuong450
  1

• Maximal light intensity from LED source

  #22 opened 7 years ago by cuong450
  1

• step G of Page 51 of 78 instruction

  #20 opened 7 years ago by cuong450
  11

• Atmel Connectivity Issue at 2.3V rather than 3.3V

  #19 opened 7 years ago by cuong450
  7

• Power Supply

  #17 opened 7 years ago by apolnaszek
  7

• reference designators (Y1,C4) in the pick and place file

  #18 opened 7 years ago by cuong450
  2

• Outsourced pcb manufacturing + assembly

  #15 opened 7 years ago by cuong450
  4

• Outsourced pcb manufacturing + assembly # 2

  #16 opened 7 years ago by cuong450
  1

• File format

  #14 opened 8 years ago by RaphP
  2

• Dot correction is not read properly for the last LED in the tlc chain

  #13 opened 8 years ago by castillohair
  1

• Change power connector

  #5 opened 8 years ago by castillohair
  4

• Change power circuit

  #6 opened 8 years ago by castillohair
  3

• Update electronic design files

  #3 opened 8 years ago by castillohair
  1

• Update readme

  #1 opened 8 years ago by castillohair
  1

• folder name change

  #12 opened 9 years ago by KarlGerhardt
  2

• device naming

  #11 opened 9 years ago by KarlGerhardt
  3

• Change ceramic resonator to quartz oscillator

  #9 opened 9 years ago by castillohair
  1

• Move programming pins to the top face of the PCB

  #8 opened 9 years ago by castillohair
  1

• Move status LEDs to top face of the PCB

  #7 opened 9 years ago by castillohair
  1

• Add design files for 3d-printed and laser-cut parts

  #4 opened 9 years ago by castillohair
  1

• Read dot correction and calibration values from SD card

  #10 opened 9 years ago by castillohair
  1