tanaes/whopping_Voron_mods

Issues

• Clicky Clacky There is a narrow gap when the door is closed.

  #46 opened 4 months ago by skyaee
  0

• Hinges

  #42 opened 7 months ago by Macmagoo
  1

• CAD doesnt work if foam_gap changes

  #45 opened 5 months ago by melsawy93
  0

• Voron V0.1/2

  #39 opened 10 months ago by hEVIq
  1

• ClickyClacky doesn't fit when I put on my side panel

  #44 opened 6 months ago by laserbeak
  1

• [clicky clack door] add slop to where the pins go

  #43 opened 7 months ago by Nathan22211
  0

• Add Step file plz

  #41 opened 7 months ago by Azertimy
  0

• Clicky Clacky Latch pivots within the extrusion as you tighten it down

  #40 opened 9 months ago by rnbarrett
  3

• Please add step file for pcb klicky

  #31 opened a year ago by chgi
  3

• LED Always ON

  #33 opened a year ago by hreality
  5

• Issues attaching and docking PCB klicky

  #37 opened a year ago by dragoonmc
  0

• add step files of the Gantry Backing Plates (extrusion_backers)

  #35 opened a year ago by toscdesign
  0

• Changes to the klicky build and readme file

  #34 opened a year ago by Sonnenwerk
  0

• Lightweight Labware V2 kinematic mounts interfere with Nevermore V6

  #30 opened a year ago by JAMMnGA
  0

• Same STL probe-heatset files

  #27 opened 2 years ago by Toogo
  1

• Left + Right Mount hit 1204 Ballscew

  #29 opened a year ago by WINTFOX00
  0

• Step File

  #28 opened 2 years ago by argolomb
  0

• GE5C - Not compatible v2.4 endstop pcb

  #26 opened 2 years ago by QuestionDevelopment
  0

• PCP Klicky

  #24 opened 2 years ago by av8er
  1

• Reverse switch position on PCB Klicky for auto z calibration

  #25 opened 2 years ago by sim4dim
  1

• tightening the linear rails at working temperature

  #22 opened 2 years ago by dderg
  0

• affected Y acceleration due to extra mass

  #19 opened 2 years ago by notseanray
  0

• Stealthburner is out of beta, CAD and STL for PCB carrier and diffuser still not available

  #16 opened 2 years ago by VinnyCordeiro
  0

• Link to drill guide in Voron 2 manual is broken

  #14 opened 3 years ago by Flapstaart
  0

• Top or side mount?

  #12 opened 3 years ago by rlaferla
  0

• Can't open F3Z nor DXF

  #6 opened 3 years ago by vjeko2404
  2

• Wago Mounts

  #7 opened 3 years ago by Bwachtel
  1

• Missing DXF Part F

  #4 opened 3 years ago by chrischoow
  1

• Material specifications needed

  #2 opened 3 years ago by madhunm
  2