Models | GitHub | Publications
This is the official implementation of C.Origami model from Cell type-specific prediction of 3D chromatin organization enables high-throughput in silico genetic screening (Tan et al. Nat Biotechnol 2023. https://doi.org/10.1038/s41587-022-01612-8). C.Origami is a deep neural network model enables de novo cell-type-specific chromatin architecture predictions. C.Origami originates from the Origami architecture that incorporates DNA sequence and cell type-specific features for downstream tasks. It can predict the effect of aberrant genome reorganization such as translocations. In addition, it can be used to perform high-throughput in silico genetic screening to identify chromatin related trans-acting factors.
To quickly try C.Origami, use the Colab Notebook
Create a new conda environment for C.Origami
conda create -n corigami python=3.9
conda activate corigamiFirst install PyTorch according to the instructions on the PyTorch Website for your operating system and CUDA setup.
To install C.Origami, run the following command according to your use cases:
For inference ONLY dependency:
pip install corigamiFor training (includes additional dependencies):
pip install corigami[training]If you want to install directly from the GitHub, git clone the repository and install all dependencies with this command:
pip install torch==1.12.0 torchvision==0.13.0 pandas==1.3.0 matplotlib==3.3.2 pybigwig==0.3.18 omegaconf==2.1.1 tqdm==4.64.0Then run:
pip install -e .| File name | Content |
|---|---|
| corigami_data.tar.gz | DNA reference sequence, CTCF ChIP-seq(IMR-90), ATAC-seq(IMR-90), Hi-C matrix(IMR-90), pretrained model weights |
| corigami_data_gm12878_add_on.tar.gz | CTCF ChIP-seq(GM12878), ATAC-seq(GM12878), Hi-C matrix(GM12878) |
The resources above are hosted on Zenodo: https://zenodo.org/record/7226561.
To run inference or training, you may download corigami_data.tar.gz which contains the training data from IMR-90 cell line, and pretrained model weights.
To test performance on GM12878 de novo prediction, you need to additionally download the add-on data file corigami_data_gm12878_add_on.tar.gz and unzip it under corigami_data/data/hg38.
C.Origami can perform de novo prediction of cell type-specific chromatin architecture using both DNA sequence features and cell type-specific genomic information.
For any inference application, download our pre-trained model or use your own model. C.Origami is pre-trained on the human IMR-90 cell line (hg38 assembly). Before inference, please download dataset and change paths according to the instruction.
Inference allows you to pick between 3 tasks: predict, perturbation, or screening. Examples for each one and the required parameters are under the examples folder.
To use run inference on cell types other than IMR-90 or GM12878, you will need to recreate the corresponding CTCF ChIP-seq and ATAC-seq from fastq files. Please follow this guide to generate the bigwig files you need.
Prediction will produce both an image of the 2MB window as well as a numpy matrix for further downstream analysis.
Usage:
corigami-predict [options]
Options:
-h --help Show this screen.
--out Output path for storing results
--celltype Sample cell type for prediction, used for output separation
--chr Chromosome for prediction
--start Starting point for prediction (width defaults to 2097152 bp which is the input window size)
--model Path to the model checkpoint
--seq Path to the folder where the sequence .fa.gz files are stored
--ctcf Path to the folder where the CTCF ChIP-seq .bw files are stored
--atac Path to the folder where the ATAC-seq .bw files are stored
An example of a C.Origami predicted (2MB window) Hi-C matrix for the IMR-90 cell line at chromosome 2 with start position 500,000:
For now the only perturbation implemented is deletion. Specify the same parameters as before along with specific deletion parameters. If you want to do multiple deletions, you can specify in the config by creating additional start and end positions.
Usage:
corigami-edit [options]
Options:
-h --help Show this screen.
--out Output path for storing results
--celltype Sample cell type for prediction, used for output separation
--chr Chromosome for prediction
--start Starting point for prediction (width defaults to 2097152 bp which is the input window size)
--model Path to the model checkpoint
--seq Path to the folder where the sequence .fa.gz files are stored
--ctcf Path to the folder where the CTCF ChIP-seq .bw files are stored
--atac Path to the folder where the ATAC-seq .bw files are stored
--del-start Starting point for deletion
--del-width Width for deletion
--padding Padding type, either zero or follow. Using zero: the missing region at the end will be padded with zero for ctcf and atac seq, while sequence will be padded with N (unknown necleotide). Using follow: the end will be padded with features in the following region
--hide-line Remove the line showing deletion site
An example of a C.Origami predicted (2MB window) Hi-C matrix for the IMR-90 cell line at chromosome 2 with start position 500,000 and a deletion from 1.5MB to 1.6MB (100,000 basepairs deleted):
In silico genetic screening can be used to see what regions of perturbation lead to the greatest impact on the prediction. Running this task will result in a bedgraph file consisting of the chr number, start position, end position, and impact score. The more impact the perturbation had, the higher the impact score.
Screening can be done only for one chromosome at a time. The end position unless otherwise specified will be 2MB from the start position specified above it. The perturb-width is allows you to set the size of the deletion you want to make or in other words how many base pairs to remove. The step-size is how far each deletion is from the past deletion (start position) - please note it is fine for the deletions to overlap.
Usage:
corigami-screen [options]
Options:
-h --help Show this screen.
--out Output path for storing results
--celltype Sample cell type for prediction, used for output separation
--chr Chromosome for prediction
--start Starting point for prediction (width defaults to 2097152 bp which is the input window size)
--model Path to the model checkpoint
--seq Path to the folder where the sequence .fa.gz files are stored
--ctcf Path to the folder where the CTCF ChIP-seq .bw files are stored
--atac Path to the folder where the ATAC-seq .bw files are stored
--screen-start Starting point for screening
--screen-end Ending point for screening
--perturb-width Width of perturbation used for screening
--step-size step size of perturbations in screening
--plot-impact-score Plot impact score and save png. (Not recommended for large scale screening, >10000 perturbations)
--save-pred Save prediction tensor
--save-perturbation Save perturbed tensor
--save-diff Save difference tensor
--save-impact-score Save impact score array
--save-bedgraph Save bedgraph file for impact score
--save-frames Save each deletion instance with png and npy (Could be taxing on computation and screening, not recommended).')
--padding Padding type, either zero or follow. Using zero: the missing region at the end will be padded with zero for ctcf and atac seq, while sequence will be padded with N (unknown necleotide). Using follow: the end will be padded with features in the following region
Please note that screening can be very computationally intensive especially when screening at a 1 Kb resolution or less. For instance, screening on chromosome 8, a medium-size chromosome which has a length of 146Mb, requires the model to make 146Mb / 1Kb * 2 predictions = 292,000 separate predictions.
An example of a barplot representing the impact score of each perturbation. C.Origami screened chromosome 2 from position 1.25 MB to 2.25 MB with a perturbation of 1000 basepairs (perturb-width) being made every 1000 basepairs (step-size):
Implementation of the four evaluation metrics (MSE, Insulation Score, Observed vs Expected intensity, Distance-stratified intensity) is located at src/corigami/inference/utils/metrics.
You may train your own model on another human or mouse cells.
You will need a bigwig file of the corresponding atac and ctcf chip sequence peaks. We recommend using Seq-N-Slide pipeline for processing raw fastqs into bigwigs using the atac or chip route. Please refer to this guide.
Experimental Hi-C matrices are needed for training. We recommend using HiC-Pro to process your experimental HiC data. C.origami accepts npz files for each chromosome - therefore, we have included a script under src/corigami/preprocessing to convert from mcool (output of HiC-Pro) to npz.
C.Origami training pipeline expects the input data to be structured in the following way:
root
└── hg38
├── centrotelo.bed
├── dna_sequence
│ ├── chr10.fa.gz
│ ├── chr11.fa.gz
│ ├── chr12.fa.gz
│ ├── chr13.fa.gz
│ ├── chr14.fa.gz
│ ├── chr15.fa.gz
│ ├── chr16.fa.gz
│ ├── chr17.fa.gz
│ ├── chr18.fa.gz
│ ├── chr19.fa.gz
│ ├── chr1.fa.gz
│ ├── chr20.fa.gz
│ ├── chr21.fa.gz
│ ├── chr22.fa.gz
│ ├── chr2.fa.gz
│ ├── chr3.fa.gz
│ ├── chr4.fa.gz
│ ├── chr5.fa.gz
│ ├── chr6.fa.gz
│ ├── chr7.fa.gz
│ ├── chr8.fa.gz
│ ├── chr9.fa.gz
│ ├── chrX.fa.gz
│ └── chrY.fa.gz
└── IMR-90
├── genomic_features
│ ├── atac.bw
│ └── ctcf_log2fc.bw
└── hic_matrix
├── chr10.npz
├── chr11.npz
├── chr12.npz
├── chr13.npz
├── chr14.npz
├── chr15.npz
├── chr16.npz
├── chr17.npz
├── chr18.npz
├── chr19.npz
├── chr1.npz
├── chr20.npz
├── chr21.npz
├── chr22.npz
├── chr2.npz
├── chr3.npz
├── chr4.npz
├── chr5.npz
├── chr6.npz
├── chr7.npz
├── chr8.npz
├── chr9.npz
└── chrX.npz
Note: if you choose to download the data from link above the data directory will automatically be structured in this way. Then when training set your --data-root option to the root directory as shown in the tree above.
Note: if you wish to use another assembly (e.g. mm10) please make sure your data directory is structured as above with the assembly name --> cell type, centrotelo.bed (this is a bed file of any regions you wish to exclude ex. telomeres and centromeres), dna sequence directory. Under the each cell type you should have a folder called genomic_features
containing the atac and ctcf bigwigs (make sure to name your files the exact same!) and a hic_matrix containing a npz file per chromosome. There can be multiple cell types (and thus multiple atac/ctcf/hic files) but only one copy of the dna sequence and centroleo.bed is needed per assembly.
Usage:
corigami-train [options]
Options:
-h --help Show this screen.
--seed Random seed for training (defaults to 2077)
--save_path Path to the model checkpoint
--data-root Root path of training data
--assembly Genome assembly for training data
--celltype Sample cell type for prediction, used for output separation
--model-type Type of model architecture (defaults to CNN with Transformer)
--patience Epoches before early stopping
--max-epochs Max epochs
--save-top-n Top n models to save
--num-gpu Number of GPUs to use
--batch-size Batch size
--ddp-disabled Using ddp, adjust batch size
--num-workers Dataloader workers
If you use C.Origami in your project, please cite the following paper:
@article{tan2023nbt,
title = {Cell-type-specific prediction of 3D chromatin organization enables high-throughput in silico genetic screening},
author = {Tan, Jimin and Shenker-Tauris, Nina and Rodriguez-Hernaez, Javier and Wang, Eric and Sakellaropoulos, Theodore and Boccalatte, Francesco and Thandapani, Palaniraja and Skok, Jane and Aifantis, Iannis and Feny{\"o}, David and Xia, Bo and Tsirigos, Aristotelis},
journal = {Nature Biotechnology},
date = {2023/01/09},
doi = {10.1038/s41587-022-01612-8},
id = {Tan2023},
isbn = {1546-1696},
url = {https://doi.org/10.1038/s41587-022-01612-8},
year = {2023},
publisher = {Nature Publishing Group}}The following lists titles of papers from the C.Origami project.
Tan et al. Cell-type-specific prediction of 3D chromatin organization enables high-throughput in silico genetic screening. Nat Biotechnol (2023). https://doi.org/10.1038/s41587-022-01612-8
Models | GitHub | Publications