tetrabiodistributed/papra-pcba
Printed Circuit Board Assembly (PCBA) for the PAPPRa m12 controller
NOASSERTION
Issues
- 1
Validate v1 of the through-hole board design
#82 opened by mmroden - 0
Validate V2 of the through-hole board design
#81 opened by mmroden - 0
- 0
- 0
- 0
refactor PAPRA-PCB repo as DOF-Component
#60 opened by capsulecorplab - 0
- 0
- 0
Add tooling holes for DFM
#72 opened by mechatroniks-git - 1
Add OSHW logo to PCB
#70 opened by mechatroniks-git - 7
- 0
Put in a debug guide
#69 opened by mmroden - 1
Investigate a potentiometer with set positions rather than a continuous adjustment
#58 opened by mmroden - 1
ignore
#65 opened by mechatroniks-git - 1
ignore 2
#66 opened by mechatroniks-git - 1
- 11
e-Fuse chip tripping at mid-range
#59 opened by mechatroniks-git - 4
LED array's not flashing on boot
#54 opened by capsulecorplab - 6
How-to repair burnt out microcontroller
#57 opened by capsulecorplab - 1
nail down the final blower selection
#61 opened by mmroden - 0
- 4
coat the m12 board for water proofing
#55 opened by mmroden - 30
Power delivery redesign
#53 opened by darraghbr - 5
waterproof/splashproof the papra? How to do that?
#34 opened by mmroden - 5
Buzzer when battery is about to run out
#14 opened by mmroden - 1
Papra Testing
#51 opened by mmroden - 2
- 4
Move PAPRa firmware to designated repo
#19 opened by capsulecorplab - 7
- 1
- 4
Test megaTinyCore v2.3.2
#48 opened by darraghbr - 3
test that protection circuitry actually protects
#47 opened by mmroden - 4
Investigate blown rev .2 PCB
#41 opened by mechatroniks-git - 5
Investigate 0.2 papra board failure
#40 opened by mmroden - 1
Update M12 board with BNC connector
#37 opened by mmroden - 1
- 0
- 1
- 5
Resolve the exact model of fan
#21 opened by darraghbr - 1
- 0
Update README and supporting docs
#32 opened by darraghbr - 6
- 0
push mechanical drawings into the repo
#28 opened by mmroden - 6
What ATTiny ICs are compatible
#25 opened by darraghbr - 1
picture of the polarity of the JST connector
#16 opened by mmroden - 1
Airtight connector for the fan power board
#18 opened by mmroden - 7
Papra fan box PCB engineering drawing
#17 opened by darraghbr - 6
Papra PCB engineering drawing
#15 opened by mmroden - 2
- 0
Fan PWM has a 1.2khz whine
#10 opened by mechatroniks-git