tobiasschuerg/MH-Z-CO2-Sensors

Issues

• Can this library be used with MH-Z16?

  #48 opened a year ago by thehans
  2

• Version 1.4.1 isn't visible in Platform.IO registry

  #45 opened a year ago by SNMetamorph
  3

• Change library name back

  #49 opened a year ago by tobiasschuerg
  0

• Documentation about how to change from MH-Z19B to MH-Z14A module is missing

  #21 opened 4 years ago by StefanL38
  1

• Add doucmentation and adjust samples with `range` parameter

  #36 opened a year ago by tobiasschuerg
  1

• Support for MH-Z14B

  #35 opened a year ago by il0vew33d
  1

• Platform.io warning: Could not find the linux_x86_64 package

  #42 opened a year ago by ben700
  1

• millis overflow bug

  #31 opened a year ago by fxkr
  5

• Update Readme/Documentation

  #47 opened a year ago by tobiasschuerg
  0

• Call of overloaded 'MHZ(const uint8_t&, const uint8_t&, const int&)' is ambiguous

  #39 opened 3 years ago by cdjost
  7

• Constant in `readCO2PWM` depends on range

  #27 opened 3 years ago by v-borovikov
  5

• Pin configuration for Wemos D1 mini

  #30 opened 3 years ago by Boerny41
  3

• Other MH-Z libraries

  #28 opened 3 years ago by MPParsley
  1

• Support for MH-Z19C?

  #22 opened 3 years ago by marcelstoer
  4

• 16bit integer constant on Arduino Uno

  #23 opened 3 years ago by jiri-janacek
  1

• Sloppy interpretation of response time and preheating time?

  #13 opened 4 years ago by AljoschaH
  2

• Auto calibration support

  #1 opened 4 years ago by tobiasschuerg
  1

• PPMUart && Temperature N/A

  #16 opened 4 years ago by quintendewilde
  2

• adjust measurement range (5000 ppm or 2000 ppm)

  #15 opened 4 years ago by PaulMerk
  1

• No data read from sensor

  #11 opened 5 years ago by Tokn59
  3

• Preheat constant calculation overflows

  #10 opened 5 years ago by stellanl
  1

• getLastTemperature using isReady

  #6 opened 6 years ago by mariusebastian
  2

• Debug status byte

  #5 opened 6 years ago by mariusebastian
  1