tockn/MPU6050_tockn

Issues

• The mpu6050 fast jitter Angle becomes smaller

  #55 opened a year ago by MrXu-98
  0

• Perform hardware interfacing on a microcontroller platform effectively

  #54 opened a year ago by sehrishgill99
  0

• Value by getangleZ() keeps on increasing with time. Even the sensor is still.

  #50 opened a year ago by MuhamdShahab
  5

• The Angle value has a large jump mpu6050.getAngleX(); mpu6050.getAngleY();

  #53 opened a year ago by MrXu-98
  0

• how to deal with multiple mpu with TCA9548A

  #52 opened a year ago by sshahriyari
  0

• Accelerometer getting stuckk at value 0.

  #51 opened 2 years ago by NadimDeeb
  0

• Accelerometer and gyroscope sensitivity

  #47 opened 3 years ago by ambiayhm
  1

• Mpu and RTC didn't work at same time

  #49 opened 2 years ago by IkhwalSyukur
  0

• compatibe with Arduino Nano Every?

  #48 opened 3 years ago by vintageradio
  0

• More than one MPU6050

  #2 opened 7 years ago by balepari
  16

• I want to drive dc motor

  #46 opened 3 years ago by Mubi88
  1

• I2C Read Issue

  #16 opened 6 years ago by MichiTheSailor
  4

• ESP8266 COMPATIBILITY

  #3 opened 7 years ago by JansZoro
  11

• Different calibration factor : powering VS. resetting

  #34 opened 6 years ago by Titibo26
  7

• Missing Yaw transfer

  #41 opened 5 years ago by Pascal-Lohscheidt
  8

• Reading the Offsets

  #45 opened 4 years ago by FelixVogelsang
  0

• Measurement units of raw data of acceleration and angular velocity

  #43 opened 4 years ago by Y-Grigoriy
  3

• This Library is compatible with ESP32?

  #25 opened 6 years ago by cruizg
  11

• How the library compiles for seeeduino xiao

  #44 opened 4 years ago by sundar19
  0

• Library not working in last version of SDK

  #11 opened 6 years ago by xvinny-zz
  1

• Change Accelerometer and gyroscope sensitivity

  #4 opened 7 years ago
  5

• accZ is always -2.00 on ESP32

  #35 opened 5 years ago by TheAnosmic
  4

• Roll value of GY-521

  #40 opened 5 years ago by ehsan3amp
  1

• Unreliable endianness of retrieved data

  #42 opened 5 years ago by edgar-bonet
  1

• Drifting on MPU6050

  #9 opened 6 years ago by 3DPJamie
  2

• Change power management

  #38 opened 5 years ago by hydrastarmaster
  0

• Temperature error - please check

  #37 opened 5 years ago by hydrastarmaster
  0

• angleX Vs angleAccX

  #36 opened 5 years ago by zouve
  0

• Angle Z shifted after rotating many times ,although X & Y were perfect ?

  #33 opened 6 years ago by Elkhawaga
  2

• Modifications, please check if it can be used

  #5 opened 7 years ago by rtek1000
  8

• Arduino Fails to upload because of an issue of the library

  #26 opened 6 years ago by ramithuh
  4

• Angle Inaccuracy - Please Advise

  #15 opened 6 years ago by sparfitt93
  4

• Compilation Issue on STM32 platform

  #18 opened 6 years ago by neilbalch
  2

• Why do you need to wait?

  #19 opened 6 years ago by asjdf
  1

• Suggestion to sleep function of MPU6050

  #17 opened 6 years ago by cedricwritescode
  0

• Angle value issues

  #13 opened 6 years ago by TokenInk
  1

• Angle X Y does not work

  #1 opened 7 years ago by palm369
  5