portenta-h7

There are 23 repositories under portenta-h7 topic.

  • ESP-Mail-Client

    mobizt/ESP-Mail-Client

    The comprehensive Arduino Email Client Library to send and read Email for Arduino devices. The library also supports other network shields or modules e.g., Wi-Fi, Ethernet, and GSM/4G modules.

    Language:C2001410658

  • khoih-prog/AsyncMQTT_Generic

    Arduino Arduino Library for ESP8266, ESP32, Portenta_H7, STM32 and RP2040W asynchronous MQTT client implementation. This library, ported to support ESP32, WT32_ETH01 (ESP32 + LAN8720), ESP8266, Portenta_H7 (Ethernet or WiFi) and STM32 (LAN8742A or LAN8720 Ethernet), Teensy 4.1 using QNEthernet, RASPBERRY_PI_PICO_W with CYW43439 WiFi. Currently supporting TLS/SSL for ESP32 only

    Language:C6451710

  • khoih-prog/MDNS_Generic

    mDNS Library for nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, AVR Mega, RP2040-based boards, etc. using Ethernet W5x00. Supports mDNS (Registering Services) and DNS-SD (Service Discovery). Ethernet_Generic library is used as default for W5x00

    Language:C++372912

  • khoih-prog/NTPClient_Generic

    Library for NTPClient to connect to an NTP time-server. Get time from a NTP time-server and keep it in sync. For ESP8266/ESP32, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. besides AVR, using ESP WiFi, WiFiNINA, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi.

    Language:C++303912

  • khoih-prog/Portenta_H7_TimerInterrupt

    This library enables you to use Interrupt from Hardware Timers on an STM32H7-based Portenta_H7 board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy

    Language:C15627

  • khoih-prog/Timezone_Generic

    Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.

    Language:C++13377

  • khoih-prog/Portenta_H7_AsyncWebServer

    Asynchronous WebServer Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library, which is relied on Portenta_H7_AsyncTCP, is part of a series of advanced Async libraries, such as AsyncTCP, AsyncUDP, AsyncWebSockets, AsyncHTTPRequest, AsyncHTTPSRequest, etc. Now supporting using CString in optional SDRAM to save heap to send very large data

    Language:C++12283

  • khoih-prog/DS323x_Generic

    Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet

    Language:C++1133

  • gdobato/portenta-h7

    It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).

    Language:Rust9233

  • khoih-prog/Portenta_H7_AsyncTCP

    Asynchronous TCP Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library is the base for future and more advanced Async libraries, such as AsyncWebServer, AsyncHTTPRequest and AsyncHTTPSRequest

    Language:C++7423

  • dmazzella/Arduino_Portenta_JerryScript

    JerryScript port to ArduinoCore-Mbed

    Language:C6201

  • khoih-prog/Portenta_H7_PWM

    This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. These PWM channels, using Portenta_H7 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software or ISR-based PWM, using millis(), micros() or Timer Interrupt. This important feature is absolutely necessary for mission-critical tasks. You can start, stop, change and restore the settings of any PWM channel on-the-fly.

    Language:C5222

  • khoih-prog/WiFiManager_Portenta_H7_Lite

    Library to configure MultiWiFi/Credentials at runtime for Portenta_H7 boards, using built-in WiFi (Murata) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

    Language:C++5212

  • khoih-prog/Ethernet_Manager_Portenta_H7

    Simple Ethernet Manager for Portenta_H7 board using Ethernet from Portenta Vision shield. Config data saved in LittleFS. For configuring/auto(re)connecting Ethernet at runtime. Use much less memory compared to full-fledge WiFiManager. Config Portal (CP) will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into CP to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic parameters from sketch and input using the same CP. DoubleDetectDetector as well as Virtual Switches feature permits entering CP as requested. Configurable HTML Headers, Customs Style, Head Elements, CORS Header

    Language:C++4201

  • khoih-prog/LittleFS_Portenta_H7

    Wrapper of LittleFS for Arduino MBED Portenta_H7 boards. This library facilitates your usage of LittleFS for the onboard flash. LittleFS supports power fail safety and high performance

    Language:C421

  • khoih-prog/Portenta_H7_AsyncUDP

    Asynchronous UDP Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library is the base for future and more advanced Async libraries, such as AsyncWebServer, AsyncHTTPRequest, AsyncHTTPSRequest

    Language:C4312

  • gdobato/portenta-h7-async

    It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).

    Language:Rust3101

  • khoih-prog/Portenta_H7_AsyncHTTPRequest

    Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of Portenta_H7_AsyncTCP library for Portenta_7, using Vision-shield thernet or Murata WiFi. This library, which is relied on Portenta_H7_AsyncTCP, is part of a series of advanced Async libraries, such as AsyncTCP, AsyncUDP, AsyncWebSockets, AsyncHTTPRequest, AsyncHTTPSRequest, etc.

    Language:C2211

  • Danny0xFF/portenta_h7-spi-lora

    Example of use to show how use Arduino Portenta H7 with a LoRa module through SPI connection.

    Language:C++1100

  • khoih-prog/Portenta_H7_Slow_PWM

    This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. It now supports 16 ISR-based PWM-channels, while consuming only 1 Hardware Timer. They are much more precise (certainly depending on clock frequency accuracy) than other software PWM using millis() or micros(). That's mandatory if you need to use in applications requiring better accuracy. PWM-channel interval can very long (ulong millisecs). The most important feature is they're ISR-based PWM-channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels, using interrupt, still work even if other functions are blocking. Max PWM frequency is limited at 1000Hz

    Language:C1201

  • mkeras/Arduino-PMC-Clock

    depreciated

    Language:C++1100

  • sigurd4/rclc_cppb

    C++ OOP bindings for Micro-ROS implementation of rclc

    Language:C++1100

  • Mahesh6702/Master_Thesis

    Development of Energy and Resource Monitoring framework for Wirless sensor nodes.

    Language:C0100