power-supply

There are 151 repositories under power-supply topic.

  • eurorack-power-bus

    4

  • SPD1000x-Tool-V1.0

    Language:Python3

  • 4swbbevb-power-average-current-mode-control

    Digital control loop implementation of a simple average current mode controller regulating the output voltage of a 4-switch buck-boost converter

    Language:C5

  • epc9149-power-1kw-8th-brick-power-module

    4:1 Fixed Conversion Rate, 1 MHz Operation Firmware Example

    Language:C5

  • epc9143-power-advanced-voltage-mode-control

    Firmware for EPC9143 300W 16th Brick Power Module Reference Design featuring advanced type IV voltage mode control with high-speed PWM steering

    Language:C5

  • nixie-ps

    High voltage power supply for nixie tubes

    Language:AGS Script5

  • fetlib

    Find the right switch. Scrapes data-sheets and ranks FETs by power loss in a DCDC converter

    Language:Python4

  • lab-supply

    Linear 0-30V, 2A lab supply

    Language:C++4
  • USBPDSINK01

    USBPDSINK01

    USB power delivery solution for charging, or as a universal power source.

    Language:HTML4

  • PierogiNixie-PSU

    A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.

    4

  • DW3005T

    Linear power supply, with digital control

    4

  • battery

    :battery: Bash script to print your Linux computer's battery level.

    Language:Shell4

  • HLW8012

    HLW8012 Power Sensor

    Language:C4

  • epc9153-power-sync-buck-acmc

    Firmware for EPC9153 250W Thin Profile Synchronous Buck Converter Design featuring average current mode control (ACMC)

    Language:C4

  • epc9148-power-3level-buck-acmc

    Firmware for EPC9148 250W Three-level Synchronous Buck Converter Design featuring average current mode control (ACMC) with enhanced PWM steering

    Language:C4

  • USB-PD-BoB

    Dual Port USB Power Delivery „Charging Only“ Breakout Box Reference Design using Microchip dsPIC33CK DSC (Project-No 00173-Rev. 2.0, 05/02/2019)

    Language:C4

  • PowerSupplyMonitor

    Monitor Voltage, Current, Current Limit and Watts

    Language:Arduino4

  • XPS

    preamplifier & power distributor for instruments

    Language:C++3

  • epc9137-power-48v-12v-bus-balancer

    EPC9137 1.5 kW 48V/12V Bi-directional Power Module Evaluation Board Firmware

    Language:C++3

  • epc9151-power-bidirectional-acmc

    Firmware for EPC9151 300W BiDirectional 16th Brick Power Module Reference Design featuring two projects for buck and boost operation

    Language:C3

  • dspic33ck-power-pwm-phase-shift

    Phase Shifted PWM Output Configuration Example for dsPIC33CK-MP devices

    Language:C++3

  • dspic33ck-power-pwm-complementary

    Complementary PWM Output Configuration Example for dsPIC33CK-MP devices

    Language:C3

  • transformer

    Flyback SMPS Transformer Calculation Tool

    Language:C3

  • powerSupply

    voltage and current regulated power supply

    3

  • Viper22-Buck-Converter

    A Buck-Converter Based on Viper22A IC on a Hi-Link Power Supply footprint

    3

  • PWR

    +5 Volt power supply for breadboards using a DC wall adapter or battery.

    3

  • Variable-DC-Power-Supply

    This includes a project on designing Variable DC Power Supply for providing : (1) +1.25V to 24V .(2) -1.7V to -24V. (3) Constant 5V.

    2

  • Biploar-power-supply-KiCAD

    A KiCAD PCB project for a simple linear bipolar power supply (+/-15V) from a 24V single-phase transformer.

    Language:nesC2

  • eda-analysis-of-power-supply

    this project is objectively aimed at understanding power supply in nigeria, by the use of a sample location (unfinished)

    Language:Jupyter Notebook2

  • power-supply-mode-switcher-driver

    Linux configurable driver for laptops which detects currently used power supply and allows customize each via additional shell scripts.

    Language:Shell2

  • llc50w-power-voltage-mode-control-with-active-current-sharing

    Two phase interleaved 50W LLC converter with digitally implemented voltage mode control and phase current balancing.

    Language:C2

  • acpi-utils

    ACPI utilities for use in scripts and one-liners

    Language:Shell2

  • dpsk3-power-buck-peak-current-mode-control

    Digital control loop implementation of a simple peak current mode controller regulating the output voltage of a synchronous buck converter

    Language:C2

  • IrrigationPiHat

    Irrigation System μPiHAT for hobby or scientific use. This repo provides a full design process to create your own μPiHAT PCB from scratch. It allows you to control solenoid valves (although the system can be modified slightly to control various sub systems) from input taken from soil moisture sensors (these can also be substituted with other sensor types).

    Language:HTML2

  • dspic33ck-power-pwm-chopped-output-using-combinatorial-logic

    Chopped PWM Output using Combinatorial Logic Configuration Example for dsPIC33CK-MP devices

    Language:C++2

  • dpsk3-power-boost-voltage-mode-control

    Digital control loop implementation of a simple voltage mode controller regulating the output voltage of an asynchronous boost converter

    Language:C2