toreanderson/clatd

Issues

• plat-fallback-prefix not working

  #39 opened 3 months ago by DasSkelett
  0

• implement RFC 8781 (Discovering PREF64 in Router Advertisements)

  #32 opened a year ago by satan1st
  4

• This system already has IPv4 connectivity; no need for a CLAT!

  #38 opened 10 months ago by vihatsoft
  2

• How can I make each device in the clat subnet have its own virtual v6 address

  #37 opened a year ago by SZ-RD-HHF
  2

• clatd command exit code bug

  #34 opened a year ago by gregbo
  2

• perl install script for necessary modules

  #33 opened a year ago by christianhenschel
  2

• Could not find a global IPv6 address on enp2s0 from which to derive a CLAT IPv6 address

  #23 opened 2 years ago by Lucaslah
  29

• clatd hangs when ufw firewall turned on

  #28 opened 2 years ago by vwidmer
  1

• clatd on single interface?

  #27 opened 2 years ago by vwidmer
  3

• clatd in router mode.

  #26 opened 2 years ago by zod076
  1

• Replace iptables with nft and add support for masquerading clat-v6-addr

  #25 opened 2 years ago by toreanderson
  0

• Update LIMITATIONS doc with info about auto-generating addresses on non-SLAAC

  #24 opened 2 years ago by toreanderson
  0

• Deadlock between clatd.service and network-online.target

  #22 opened 2 years ago by patrakov
  2

• This system already has IPv4 connectivity; no need for a CLAT

  #21 opened 2 years ago by tryeverything91
  17

• tayga ipv6-addr cannot but must be set

  #18 opened 2 years ago by HealingArcYT
  4

• Theoretical Deployment: IPv6-Only VPS

  #19 opened 2 years ago by moranbw
  4

• Looks like working properly but still has no IPv4 connectivity

  #17 opened 3 years ago by Sumire-Heanna
  3

• install script at raspbian detects tayga but still tries to install a rpm or source code alternative

  #15 opened 5 years ago by thomasschaeferm
  4

• not possible to use with busybox ash/hush shells.

  #13 opened 5 years ago by nihilus
  0

• ip -6 route get with netmask failed

  #12 opened 5 years ago by genofire
  4

• Improve Makefile for packagers

  #8 opened 7 years ago by toreanderson
  1

• systemctl isn't always in /usr/bin

  #11 opened 7 years ago by spakka
  0

• On clat interface: IPv6 UDP Checksum getting set to invalid 0x0000

  #10 opened 7 years ago by PrashantSunkari
  1

• Question

  #9 opened 8 years ago by jaseermohammed
  4

• RPM Packaging for Fedora/Redhat/CentOS

  #6 opened 9 years ago by davidsummers
  1

• Needs to work on Mac OS X

  #5 opened 9 years ago by davidsummers
  4

• Need to set advmss on IPv4 default route

  #4 opened 9 years ago by toreanderson
  0

• question

  #3 opened 9 years ago by thomasschaeferm
  10

• ipv4-check maybe improved - wrong result

  #2 opened 10 years ago by thomasschaeferm
  4

• SLAAC problem, if more than on prefix at the eth-interface

  #1 opened 11 years ago by thomasschaeferm
  0