tork-a/roomblock

Issues

• Create2 / RPLidar 1A - Error, cannot bind to the specified serial port /dev/rplidar

  #18 opened 3 years ago by NexxuSix
  1

• iRobot Create 2 and RPLidar A1

  #17 opened 4 years ago by JordanD7
  1

• set the OI mode at shutdown

  #16 opened 4 years ago by germal
  0

• Failed to open device /dev/ttyACM0

  #15 opened 4 years ago by QbHead
  0

• Roomblock fail to open port /dev/roomba

  #14 opened 5 years ago by rwayong
  13

• Problem encounted during roslaunch roomblock_bringup roomblock.launch

  #10 opened 7 years ago by Gambit30
  3

• iRobot Create 1 Support

  #8 opened 7 years ago by Guofeng-Tang
  3

• Low frame rate of Ricoh Theta S on Raspberry Pi2

  #9 opened 7 years ago by 7675t
  1

• Can I use this code for non-roomba robot?

  #5 opened 7 years ago by Guofeng-Tang
  9

• Control clean motors

  #7 opened 7 years ago by 7675t
  0

• Problem installing roomblock

  #6 opened 7 years ago by RomanROBER
  9

• Release to Kinetic

  #2 opened 7 years ago by 7675t
  1