trouch/CreawsomeMod

Issues

• Profile cannot be opened with Ender 3 printer selected in Cura 4.2.1

  #109 opened 5 years ago by MisterPrintf
  1

• Download for windows

  #105 opened 5 years ago by Luckyboii
  2

• Dynamic quality

  #102 opened 5 years ago by Targa2405
  1

• No Background model for CR-10 Mini

  #108 opened 5 years ago by diegohvanni
  1

• print profil

  #95 opened 5 years ago by iMattmax
  1

• TPU material not supported?

  #92 opened 5 years ago by isometriq
  9

• Slightly adjust start gcode

  #90 opened 5 years ago by Keichide
  6

• Request for ASA profile

  #82 opened 5 years ago by salacpavel
  0

• Custom Machine Multi Material support

  #81 opened 5 years ago by prepajar
  2

• Cura 4.2?

  #98 opened 5 years ago by clumsyzombie
  5

• Model print order placement request

  #94 opened 5 years ago by LD3D
  1

• Z Offset Ignored on CR-20 Pro

  #91 opened 5 years ago by rjnich
  3

• Request for PVA/HIPS and Second Nozzle option

  #75 opened 5 years ago by TheSin-
  5

• GCode keywords not filled in

  #66 opened 5 years ago by Maycuz
  4

• Ender 3 model missing in Cura

  #106 opened 5 years ago by namadori
  5

• No machine preview

  #112 opened 5 years ago by DarkDudae
  4

• How i install creawmod on Windows cura 4

  #115 opened 5 years ago by Lui2004
  5

• Cura 4.3, Ender 3 line width is back to 0.4mm

  #111 opened 5 years ago by juckendesAuge
  1

• Now native to Cura since 4.2?

  #114 opened 5 years ago by ArmedLeftist
  1

• Support generation

  #113 opened 5 years ago by frozenPG
  3

• Misspelled "benefit" as "befefit" in README.md

  #103 opened 5 years ago by m0ntsn0w0
  0

• Cura 4.2.1 upgrade process

  #100 opened 5 years ago by EvilSpock
  3

• Update readme to note mod inclusion with Cura 4.2

  #101 opened 5 years ago by Mazo
  1

• Ender 3 dimensions

  #97 opened 5 years ago by batrappo
  3

• No nozzle size selection?

  #99 opened 5 years ago by adamzimnyy
  1

• Can't Slice when using support in cura 4.2

  #96 opened 5 years ago by sihyeonlee
  5

• Cura won't launch

  #93 opened 5 years ago by ReauLeau
  4

• Crash Cura 4.1 when trying to add non-Creawsome Ender-3

  #79 opened 5 years ago by jpcuzzourt
  2

• CreawsomeMod tweaking proposal

  #69 opened 5 years ago by PriestWithKnives
  23

• Poor top layers

  #84 opened 5 years ago by Luksusfinger
  1

• CreawsomeMod-4.1.0 Z Seam Alignment - Sharpest Corner don't work

  #88 opened 5 years ago by juckendesAuge
  5

• Instructions for running Cura from source

  #87 opened 5 years ago by plasticlobster
  1

• Excessive retractions while printing infill keep jamming up my extruder gears

  #86 opened 5 years ago by midicdj1000
  8

• Cura 4.1 Crash

  #83 opened 5 years ago by nvladik
  2

• Supports Difficult to Remove

  #73 opened 5 years ago by agrias
  6

• Won't work on Mac OSX 10.14.5

  #80 opened 5 years ago by FilamentFriday
  2

• Gaps at start of each print line - Try again

  #77 opened 5 years ago by gerhick
  1

• Top layer not sliced when using latest mod with Cura 4.1.0

  #70 opened 5 years ago by DennisHeijmans
  2

• Gaps at start of each print line

  #61 opened 5 years ago by gerhick
  2

• prints are 0.2 layer height no mater what profile i select

  #64 opened 5 years ago by davelandrygmail
  4

• Increase overhang angle supports on ender 3

  #67 opened 5 years ago by BelleNottelling
  7

• Vase Mode (Spiralize) seems to ignore number of bottom layers..?

  #72 opened 5 years ago by vark8
  1

• Cura 4.1 Ender-2 Goes to 200mm Y-Axis

  #76 opened 5 years ago by feversmeier
  1

• Model view is grayed out

  #74 opened 5 years ago by Li53
  0

• Recommendations for material settings

  #71 opened 5 years ago by JoshuaMorris
  1

• 4.1 CreawsomeMod does not open (Mac)

  #63 opened 5 years ago by ren9216
  5

• Custom material profile not working with Cura 4.1 - Release b3.2

  #68 opened 5 years ago by kintarojs
  1

• combing speed

  #65 opened 5 years ago by floxflux
  0

• Lines support has connect lines as default

  #59 opened 5 years ago by kort0175
  5

• Download link for the Cura mod 4.1 is broken.

  #60 opened 5 years ago by iMattmax
  1