ttrftech/NanoVNA

Issues

• Receive invalid data by command "data 0" via USB port

  #159 opened 6 months ago by ebi-gunkan
  0

• Licens of code

  #158 opened a year ago by werwaswarum
  0

• data method returns unexpected data (extra "0.

  #110 opened 5 years ago by InventoryTech
  2

• Plot Transmission Logmag Not Working

  #157 opened a year ago by erinluihing
  0

• How do I find the author and start communicating with him

  #156 opened a year ago by keyone808
  0

• sd card implementation

  #155 opened a year ago by dr-onestone
  0

• Turkish language support

  #154 opened 2 years ago by iamfusta
  0

• MATLAB (on Windows) unable to read from NanoVNA V2_2

  #153 opened 2 years ago by amritzoad
  0

• NanoVNA not recognized by Python script

  #150 opened 3 years ago by 0xCoto
  8

• How to calculate the values of resistive return loss bridge？

  #152 opened 3 years ago by chennike
  0

• Upgrade failed. Restore.

  #151 opened 3 years ago by illukin
  1

• Group Delay Calculation Does not Unwrap Phase

  #149 opened 4 years ago by roseengineering
  0

• How to re-activate marker settings after switching off the nanovna?

  #148 opened 4 years ago by johanna-erc
  0

• Screen capture

  #146 opened 4 years ago by LightningStalker
  1

• S21 gain figures

  #147 opened 4 years ago by Alle1307
  0

• Possible to Get SWR for Specific Frequency?

  #134 opened 5 years ago by ChZeman
  1

• Update 20201013 - NanoVNA V2-2

  #145 opened 4 years ago by JohnT314
  0

• Provide mecanism to stop rf output

  #143 opened 4 years ago by satfan52
  0

• exporting S1P file with sw Nano VNA-Saver yields wrong data

  #136 opened 4 years ago by Herman-RFguy
  2

• Re v0.8 bandwidth feature

  #140 opened 4 years ago by owenduffy
  8

• WRONG PID after update

  #142 opened 4 years ago by f4bpp
  6

• Frequency Offset

  #141 opened 4 years ago by RavinMaddHatter
  0

• mode "rf off" to measure only b-waves (incoming waves)?

  #137 opened 5 years ago by iptish
  1

• Firmware 0.5.4 'reald;

  #139 opened 5 years ago by 77Leo
  1

• Calculation Questions!

  #138 opened 5 years ago by Jacy-debug
  0

• Export of S1P file yields wrong data?

  #135 opened 5 years ago by Herman-RFguy
  2

• How it works？

  #133 opened 5 years ago by cq2ap9
  5

• Incorrect battery readings

  #131 opened 5 years ago by SMinin
  3

• c40d78d Random jitters specific sweep ranges

  #127 opened 5 years ago by d51r3verse
  5

• Not use mutex

  #128 opened 5 years ago by DiSlord
  1

• Nonsense calibration if sweep is paused before the calibration

  #123 opened 5 years ago by yarda
  3

• Work around si5351

  #122 opened 5 years ago by DiSlord
  9

• No way to exit from the marker/search/minimum (other than reboot)

  #124 opened 5 years ago by yarda
  3

• frequency grid broken after last update

  #112 opened 5 years ago by DiSlord
  0

• fw 0.6.0-20200118 doesn't work

  #115 opened 5 years ago by hiperiondev
  0

• fw 0.5.4 allow span of 0HZ

  #114 opened 5 years ago by hiperiondev
  0

• LTO causes freeze

  #109 opened 5 years ago by edy555
  4

• Smith value format is not persistent

  #99 opened 5 years ago by owenduffy
  5

• Extra "0." in string returned from data() method

  #111 opened 5 years ago by InventoryTech
  0

• no "-" input symbol at num pad, For example, RL ref level want to set to -30dB

  #108 opened 5 years ago by bingwbng
  0

• Release 0.5.4 graphic problems

  #107 opened 5 years ago by Fbales
  0

• Release 0.5.4 problems

  #106 opened 5 years ago by Fbales
  1

• What is limiting the frequency lower bound ?

  #101 opened 5 years ago by ks156
  2

• Missing Autoscale

  #102 opened 5 years ago by damib
  4

• Question about SA612 OSC input part

  #105 opened 5 years ago by JM1XTB
  1

• Cross compiling on a Raspberry Pi...

  #93 opened 5 years ago by dl9sec
  3

• lever switch function

  #95 opened 5 years ago by edy555
  1

• make fails with error: 'for' loop initial declarations are only allowed in C99 or C11 mode

  #92 opened 5 years ago by JulyJim
  1

• New firmware 0.4.0 doens't work as expected...

  #96 opened 5 years ago by dl9sec
  3

• separate display format from calibration set in saved settings

  #94 opened 5 years ago by ssd2
  2