uweseimet/scsi2pi

Issues

• s2p: Add append mode for tape image files

  #104 opened 16 hours ago
  0

• s2p: Terminate on unknown global properties

  #103 opened 6 days ago
  0

• s2p: Create a command script for s2pexec

  #102 opened 6 days ago
  0

• Add a simple simh .tap file analyzer tool

  #101 opened 10 days ago
  1

• Add simh image file support to tape device

  #100 opened 12 days ago
  89

• Add support for linked commands to target mode and s2pexec

  #98 opened a month ago
  1

• Eliminate ModePageDevice class

  #97 opened 2 months ago
  0

• ideas for getting Akai S1000 to work with scsi2pi

  #95 opened 2 months ago
  0

• Move general storage device code from Disk to StorageDevice

  #94 opened 3 months ago
  0

• Streamer/Tape support (focus on tar-compatibility)

  #93 opened 11 days ago
  66

• Amiga - CD Rom Devices do not work

  #92 opened 4 months ago
  21

• Remove support for legacy aibom and gamernium boards

  #91 opened 6 months ago
  0

• Make device selection of build process even more flexible

  #90 opened 6 months ago
  0

• s2p: Support SCSI and SASI devices on the same bus

  #89 opened 7 months ago
  0

• s2pexec: Make logging of bus signals optional

  #88 opened 8 months ago
  0

• s2p: Add option to ignore /etc/s2p.conf and $HOME/.config/s2p.conf

  #87 opened 8 months ago
  0

• s2p: Persist (memorize) the current setup in /etc/s2p.conf

  #86 opened 8 months ago
  0

• s2p: READ CAPACITY(16) ignores allocation length

  #85 opened 8 months ago
  0

• DaynaPort emulation: Improve support for parprouted

  #84 opened 8 months ago
  6

• Merge SASI and SCSI controller classes

  #83 opened 9 months ago
  0

• Mac Plus write Error - same as with piscsi

  #82 opened 9 months ago
  33

• Locale is not always detected correctly

  #81 opened 9 months ago
  1

• s2p: Add a boolean parameter to disable the creation of the piscsi bridge

  #80 opened 9 months ago
  5

• s2p: Switch to an appropriate caching mode when extended READ/WRITE LONG support is required

  #79 opened 9 months ago
  0

• Install a sample /etc/s2p.conf file with the binary distribution

  #78 opened 9 months ago
  1

• Merge Bus and GpioBus classes

  #77 opened 9 months ago
  0

• Update Raspberry Pi type detection

  #76 opened 9 months ago
  0

• Can't set IP address when attaching DaynaPort device

  #75 opened 9 months ago
  6

• s2pexec: Add option for explicit bus reset

  #74 opened 9 months ago
  0

• s2pexec READ(6) fails in 2.0.1 when LBA out of range

  #73 opened 9 months ago
  22

• Add SCSI2Pi version to the vendor-specific INQUIRY data

  #72 opened 9 months ago
  9

• Investigate handling of bus settle delay

  #71 opened 9 months ago
  20

• Make binaries in the binary distribution runnable without sudo

  #70 opened 9 months ago
  0

• Update Pi 4 GIC memory mapping

  #69 opened 9 months ago
  0

• s2p: Evaluate/Implement LRU cache with configurable size

  #68 opened 9 months ago
  3

• Clean up CD-ROM device code

  #67 opened 9 months ago
  0

• s2p: Make the log pattern configurable

  #66 opened 9 months ago
  0

• s2pctl can attach SASI drives to SCSI controllers

  #65 opened 9 months ago
  0

• piscsi_bridge should not be created by default when WiFi is used for network access for daynaport

  #64 opened 9 months ago
  15

• Trying to set image file folder location to path outside /home via scp fails with nondescript error

  #63 opened 9 months ago
  10

• Optimize writing sector sequences to an image file

  #62 opened 10 months ago
  0

• Optimize reading sector sequences from an image file

  #61 opened 10 months ago
  0

• Add write-through caching mode

  #60 opened 10 months ago
  1

• s2p: Support exotic sector sizes (multiples of 4)

  #59 opened 10 months ago
  0

• Improve implementation of READ/WRITE LONG

  #58 opened 10 months ago
  1

• Add an optional non-caching image file access layer

  #57 opened 10 months ago
  0

• Printer output file is not properly closed

  #56 opened 10 months ago
  1

• Make controller more flexible wrt transfer sizes

  #55 opened 10 months ago
  0

• Remove dependency to libpcap

  #54 opened 10 months ago
  0

• Replace USE_SEL_EVENT_ENABLE by __linux__

  #53 opened 10 months ago
  0