veneridesign/chemshapes

Issues

• slice height... and other questions about arduino...

  #18 opened 9 years ago by GoogleCodeExporter
  3

• DOES CS1_HOST_V0.3.4 SUPPORT ARDUINO UNO R3

  #19 opened 9 years ago by GoogleCodeExporter
  0

• what kind of stepper motor driver board!

  #20 opened 9 years ago by GoogleCodeExporter
  0

• [deleted issue]

  #21 opened 9 years ago by GoogleCodeExporter
  0

• buy chemshield

  #22 opened 9 years ago by GoogleCodeExporter
  0

• Hangs/stuck on Red Fulscreen display

  #16 opened 9 years ago by GoogleCodeExporter
  8

• Scrambled Screen Upon Start

  #17 opened 9 years ago by GoogleCodeExporter
  2

• 0.3.3 did not start - OpenGL minimum requirement not met!

  #14 opened 9 years ago by GoogleCodeExporter
  2

• Positional awareness

  #15 opened 9 years ago by GoogleCodeExporter
  2

• Add CS1 Host support for Arduino board type auto-detection (mega 2560 and 1280)

  #13 opened 9 years ago by GoogleCodeExporter
  9

• Not start

  #11 opened 9 years ago by GoogleCodeExporter
  9

• Artifacts on teapot.stl

  #12 opened 9 years ago by GoogleCodeExporter
  2

• vs 3.1 does not open

  #9 opened 9 years ago by GoogleCodeExporter
  8

• Firmware for ramps: include x, and z control.

  #10 opened 9 years ago by GoogleCodeExporter
  1

• Add decimal places for slice height parameter

  #7 opened 9 years ago by GoogleCodeExporter
  2

• Add option to CS1 Host to modify slice resolution and slice/background color!

  #8 opened 9 years ago by GoogleCodeExporter
  2

• add support to mixed QUAD/TRIANGLE meshes into OBJ loader - Blender OBJ Exporter ( and other exporters ) Not Compatable

  #6 opened 9 years ago by GoogleCodeExporter
  6

• 'GLWidget' object has no attribute 'fbo'

  #5 opened 9 years ago by GoogleCodeExporter
  16

• Unable to Load STL File (OpenGL Version 1.1.0 - Belown the minimum 2.0.0)

  #4 opened 9 years ago by GoogleCodeExporter
  9

• Program does not start

  #3 opened 9 years ago by GoogleCodeExporter
  61

• missing MSVCR71.dll message

  #1 opened 9 years ago by GoogleCodeExporter
  7

• Will not run

  #2 opened 9 years ago by GoogleCodeExporter
  1