vlsicad

12v1A-transistor-based-smps

axi-stream-

this is axi master stream hdl code with tb

axi_gpio

this is axi slave gpio hdl code for interface the pins

clock-divide-by-n

this is verilog code for clock divider by n , n may be odd or even , and output clock is 50% duty cycle .

dsp-multirate-hdl-code-and-xilinx-implementation

iic-protocol-vhdl-code

IIc protocol in vhdl code, fsm based, hope you find it useful

serial_vb_code_with_plot

STM32-ADC-DMA-UART

STM32CubeIDE 1.2.0 project for 2 adc via dma , uart2 for sending values

stm8_breakout_board

this is allegro cadence 17.2 design of stm8s103f3 development board or breakout board with ch340c chip

synthesis-scripts

this repository contains maximum rtl syntesis tool script

vlsicad/clock-divide-by-n

this is verilog code for clock divider by n , n may be odd or even , and output clock is 50% duty cycle .

vlsicad/stm8_breakout_board

this is allegro cadence 17.2 design of stm8s103f3 development board or breakout board with ch340c chip

vlsicad/dsp-multirate-hdl-code-and-xilinx-implementation

vlsicad/iic-protocol-vhdl-code

IIc protocol in vhdl code, fsm based, hope you find it useful

vlsicad/synthesis-scripts

this repository contains maximum rtl syntesis tool script

vlsicad/axi-stream-

this is axi master stream hdl code with tb

vlsicad/axi_gpio

this is axi slave gpio hdl code for interface the pins

vlsicad/axi_vip_gpio_vivado_2017

vlsicad/black-pill-hc-sr04-usb

this stm32cube ide 1.12-1.15 proj for black pill + usb + hc-sr04 reading can seen on any usb terminal like YAT or simple hid write

vlsicad/black_pill_custom_usb_device

this is rar file for project which is based on black pill stm32f401 working usb custom device can send and received the data

vlsicad/current-sense-circuit-1

there is two circuit comparator and transistor based circuit to detect the current and switch the output for it.

vlsicad/eda-tool-setup-tcl-scripts

vlsicad/fifo_single_port_ram_with_all_control_logic

this is fifo with ram and all required control logic like fifo full, empty, ready etc. code is in vhdl. hope you find this is useful, can be useful in cdc design.

vlsicad/linux-script-to-build-the-system-from-mini-os

this is my old pc history files , which has some important steps and commands for building system from mini os

vlsicad/mc34063_step_up_design

it is high voltage stepup from 12 v protues design circuit using mc34063 chip

vlsicad/mikroc_better_float_str_function

this is float to str function written for pic in mikroc compiler

vlsicad/nclaunch-v-vhdl-script-with-code

vlsicad/number_to_sfixed_convertor

this is matlab script which convert the any value into sfixed number for hdl coding

vlsicad/ps-file-to-pdf-file-and-folder-convertor-

this is linux script which will convert the all ps files in folder to pdf files in one go

vlsicad/scilab_cmos_gates

cmos gates using scilab xcos

vlsicad/screen-resolution-change-linux-script

this is xrandr based screen resolution change linux script

vlsicad/sfixed-point-convertor

this is matlab code which will convert the number to sfixed for HDL coding

vlsicad/simple-hid-write-vs-c-code

this is well running code for hid , well tested on stm32f401 with custom hid, hope you find it soon for you work

vlsicad/spyglass-cdc-review-test1

vlsicad/SSD1306-MCP4921-ADC-UART

This is mikroc project for interface SSD1306 DAC MCP4921 ADC and UART with simulation file

vlsicad/stm32f401-black-pill-ee-write-and-read

these are the functions test on f401 for eeprom emulation for write and read, which is tested on black pill

vlsicad/stm8_multi_adc

vlsicad/stm8_uart_adc_pwm_in_one_code

it is desgin code for uart pwm and adc in once project, for stm8,

vlsicad/tm1673-stm8-lib

this is a st visual dev code file for tm1673 for stm8 mcu

vlsicad/verilog-code-generator

it is a verilog code generator for most modules with testbench