APurohit10

APurohit10's Stars

• nxp-appcodehub/dm-tamper-detection-using-low-power-wakeup-sensor-over-ble

  This example demo describes how to configure low-power motion or magnetic wake-up sensor for tamper/theft detection and transmit ALERT to connected end user via BLE wireless UART using FRDM-MCXW71.Such use-case can find many applications where user would like to completely shut off power supply or put the device in power down mode etc.

  Language:C1

• nxp-appcodehub/dm-freemaster-fxls89xxxf-evaluation-gui-firmware

  This example demonstrates combining ISSDK and FreeMASTER to create FXLS89xxxF 3-axis accelerometer evaluation GUI for our customer to evaluate this sensor using sensor development tools with sensors expansion boards.

  Language:C1

• nxp-appcodehub/dm-freemaster-nmh1000-evaluation-gui-firmware

  This example demonstrates combining ISSDK and FreeMASTER to create NMH1000 magnetic switch evaluation GUI for our customer to evaluate this sensor using sensor development tools with sensor expansion boards

  Language:C1

• nxp-appcodehub/dm-mpl3115-pressure-altimeter-examples

  This example demo describes how to configure absolute pressure sensor MPL3115 for pressure and altimeter mode. This sensor can find use in many industrial, medical applications.

  Language:C1

• nxp-appcodehub/dm-nmh1000-magnetic-switch-example

  This demo describes how to configure NMH1000 magnetic switch sensor to enable magnetic wakeup usecase. Such usecase can find many applications where user would like to completely shut off power supply or put the device in power down mode based on magnetic field applied. Eg include, smart meters, shelf labels, reed switch replacement, smart home etc

  Language:C1

• nxp-appcodehub/dm-on-device-training-fan-anomaly-on-mcxn947

  On-device trainable anomaly detection base on MCX platform

  Language:C4

• nxp-appcodehub/an-fxls8974cf-low-power-wake-up-examples

  This software describes how to configure SDCD block of FXLS897xCF sensor to enable low-power motion wake-up in interrupt mode and use auto-wake/sleep feature to autonomously put the sensor back to low-power sleep mode when no-motion is detected for configured auto-sleep timer.

  Language:C1

• RobertRostohar/NXP_Sensor_SDK

  NXP Sensor SDK

  Language:C52