/VIO

Interface PX4 with Realsense T265

Primary LanguageC++Apache License 2.0Apache-2.0

VIO (Visual Inertial Odometry)

This package is a bridge from PX4 to the Realsense T265 camera, which provides odometry data.

Dependencies

Installation

These steps contain the installation process, software dependencies and building instructions.

  1. This is a ROS package, it assumes you have either ROS Kinetic (Ubuntu 16.04) or ROS Melodic (Ubuntu 18.04) installed, instructions can be found here. Please also make sure you install librealsense from here.

  2. Install catkin and create your catkin workspace directory.

    sudo apt install python-catkin-tools
mkdir -p ~/catkin_ws/src

  3. Clone this repository in your catkin workspace.

    cd ~/catkin_ws/src
git clone https://github.com/Auterion/VIO.git

  4. Install MAVROS (version 0.29.0 or above).

    Note: Instructions to install MAVROS from sources can be found here.

    • Melodic 
      sudo apt install ros-melodic-mavros ros-melodic-mavros-extras
    • Kinetic 
      sudo apt install ros-kinetic-mavros ros-kinetic-mavros-extras

  5. Build the package:

    cd ~/catkin_ws
catkin build px4_realsense_bridge

  6. Run the ROS node:

    source ~/catkin_ws/devel/setup.bash
roslaunch px4_realsense_bridge bridge_mavros.launch

Note This launch file starts the mavros node as well. Mavros needs to be running but if it is started elsewhere the basic launch file bridge.launch can be used. The file bridge_mavros_sitl.launch is only for using this node in combination with the PX4 SITL toolchain (Simulation). Instructions on how to setup the PX4 SITL toolchain can be found here.