AxxAxx/AxxSolder

Issues

• Design a better looking screen for landscape mode

  #85 opened a month ago by AxxAxx
  0

• Add Displayed temperature filter length a user setting

  #86 opened a month ago by AxxAxx
  0

• Individual tip calibrations

  #34 opened 2 months ago by wildstar87
  3

• Diode leakage current

  #77 opened 2 months ago by electroniceel
  7

• DFU Fails

  #69 opened 4 months ago by BB-BenBridges
  6

• Hirose RPC1-12RB-6P(71) Obsolete

  #70 opened 4 months ago by shakey2k
  8

• Is support for tweezers possible, such as the AN115?

  #67 opened 5 months ago by F10F4F9
  3

• Read board version at startup

  #61 opened 7 months ago by AxxAxx
  1

• Automatically detect USB-PD supply capability and limit power

  #49 opened 7 months ago by AxxAxx
  8

• Move down screw terminal and display stand off in order to allow space for a M2.5 nut between main PCB and Display board

  #58 opened 7 months ago by AxxAxx
  0

• Sometimes the temperature is calculated to be 10 deg too high for ~100 ms, fix this

  #56 opened 8 months ago by AxxAxx
  0

• Settings item to limit output power

  #50 opened 9 months ago by AxxAxx
  1

• Pcb file

  #48 opened 9 months ago by imranali333
  1

• Implement a clamping anti-windup method

  #46 opened 9 months ago by AxxAxx
  0

• Sometimes miss current measurement

  #42 opened 9 months ago by AxxAxx
  0

• Screen rotation

  #43 opened 9 months ago by AxxAxx
  0

• Show pop-up when trying to start without a cartridge inserted

  #44 opened 9 months ago by AxxAxx
  0

• Maybe u can change CMI-9653S-SMT-TR for something more popular and available? Ordering it from mouser doesnt make sensie for me and i cant find it anywhere else.

  #38 opened 10 months ago by AxxAxx
  3

• Implement feed forward control loop

  #14 opened 10 months ago by AxxAxx
  0

• LCSC.com Part Numbers for v2.1 and v2.2

  #25 opened 10 months ago by f616
  4

• LTC4440A-5 is too expensive. Can you exchange it for a cheaper one ?

  #26 opened 10 months ago by wfkbsse
  3

• Schedule for V3.0

  #37 opened 10 months ago by Andy79881
  1

• Rework station enclosure design

  #24 opened 10 months ago by AxxAxx
  5

• Detect if voltage is too low and do not to switch heater

  #29 opened 10 months ago by AxxAxx
  0

• Update enclosure to better fit/hold power connector

  #23 opened 10 months ago by AxxAxx
  0

• Utilize current measurement for "no-tip-detection"

  #4 opened a year ago by AxxAxx
  0

• Firmware upload via USB

  #11 opened a year ago by AxxAxx
  1

• Power via USB-C PD

  #12 opened a year ago by AxxAxx
  1

• Implement dual drive and dual TC amplifiers for JBC tweezers

  #13 opened a year ago by AxxAxx
  1

• Connect tip of soldering iron to protective earth (PE). This reduces the risk of ESD damage

  #15 opened a year ago by AxxAxx
  1

• Replace big automotive fuse with something smaller and SMD

  #16 opened a year ago by AxxAxx
  1

• Implement READ/WRITE to EEPROM

  #10 opened a year ago by AxxAxx
  1

• Remove unused ambient temperature sensor

  #3 opened a year ago by AxxAxx
  3

• Filter buttonpress input as handle input and stand input

  #18 opened a year ago by AxxAxx
  0

• Stand temperature instead of full cooldown

  #17 opened a year ago by blackfield3k
  4

• Update Portable_connections.jpg with clear connections and connector name

  #9 opened a year ago by AxxAxx
  1

• Enable stand-by/sleep with buttonpress

  #5 opened a year ago by AxxAxx
  1

• Implement automatic detection of handle T210/T245

  #7 opened a year ago by AxxAxx
  1

• Implement automatic emergency sleep if the handle is left ON for a long time

  #8 opened a year ago by AxxAxx
  1

• Replace expensive DC/DC to cheaper alternative

  #2 opened a year ago by AxxAxx
  0

• Add BOM with component cost

  #1 opened a year ago by AxxAxx
  1