BluPix

BluPix's Stars

• eyesoft/home_assistant_buspro

  The HDL Buspro integration allows you to control your HDL Buspro system from Home Assistant.

  Language:Python165

• porech/engarde

  A go network utility to create a reliable IP tunnel over multiple connections

  Language:Go26841

• labthings/picamerax

  A pure Python interface for the Raspberry Pi camera module, with extra features and fixes

  Language:Python3110

• rOzzy1987/MacroPad

  Replacement configuration software for chinese macropad keyboards

  Language:C#1066

• tetsu97/WristWatch-G2-Extruder

  This is WristWatch, a standalone extruder designed by @bythorsthunder WWG2 is built as an alternative to WristWatch BMG etruder - but it uses Galileo 2 insides for pushing filament. Development started approximately when G2SA was being worked on, but later Thor was kind enough to allow me help him with further refinements of this extruder.

  836

• SLAzurin/attack-shark-x3-fix

  Kysona M600 mirror

  17

• adirh3/Sonar.AutoSwitch

  Language:C#495

• XRayAdamo/NearDrop

  An unofficial Google Nearby Share app for macOS (Advanced version)

  Language:Swift372

• DW-Tas/Klicky-00

  The goal of this probe is to give Voron TAP-like consistency with repeatable Z-offset even when changing nozzles.

  1428

• sporkus/probe_accuracy_tests

  Language:Python13528

• mirkomrk/Zero-17-mod

  3

• lcompilers/lpython

  Python compiler

  Language:C++1.5k157

• Armchair-Heavy-Industries/Xol-Toolhead

  Xol Toolhead is the evolution of 'Mantis Xol 2'. Aimed at modularity and quality of life improvements for installation and serviceability. We have left the mantis carriage behind, and thus are now just Xol sans Mantis. Don't worry, it's still a bit ugly. We wouldn't fix that.

  41448

• andrewmcgr/klipper_tmc_autotune

  TMC stepper driver autotuning Klipper python extra

  Language:Python560120

• KDPate/Panel-Clip

  18

• JackJack3231/V0-Auxiliary-Fan

  Auxiliary Cooling Fan for the Voron V0 Printers

  1176

• chirpy2605/voron

  Voron mods

  63070

• BarsMonster/S42B-NanoStep

  Closed loop stepper motor driver - rewritten core

  Language:C8

• sannidhyaroy/Soduto

  Soduto is a KDE Connect compatible client for macOS. It allows better integration between your phones, desktops and tablets.

  Language:Swift12310

• chestwood96/SlideSwipe

  11214

• sporkus/smol_mantis

  507

• MakerBogans/dirtybird

  7610

• Clon1998/mobileraker_companion

  Companion for mobileraker, enabling push notification.

  Language:Python19612

• jlas1/Klicky-Probe

  Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

  1.2k282

• Polar-Ted/Voron-V0-Display-on-CANBUS

  Wiring and config to run the Voron V0 display over CAN

  11

• maz0r/klipper_canbus

  guide on setting up canbus in klipper

  18342

• bambulab/BambuStudio

  PC Software for BambuLab and other 3D printers

  Language:C++1.8k244

• scottmason88/BTT-PITFT5-Mount-for-Voron-v2.4

  Mount for PI TFT 5 inch for the Voron 2.4, using 2.2 bracket

  6411

• makerbase-mks/MKS-SERVO42C

  MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half bridge driver with 8 MOSFET, it makes the motor quieter, lower vibration and Lower calorific.

  13533

• mandryd/VoronUsers

  Voron Community mods, slicer profiles and firmware configurations.

  Language:GAP349