BondtechAB/Bondtech_Prusa_i3

Issues

• MK2.5S 3.14.3 Firmware update

  #29 opened 5 months ago by ChrisAnthenum
  0

• MK3S + MMU + Mosquito - Firmware 3.13.2-7846

  #28 opened a year ago by emmerth
  1

• After mounting, X endstop is not touching

  #27 opened a year ago by nbouayad
  3

• MMU3 MK3S/+ Bondtech Bear Upgrade compatability

  #26 opened a year ago by taz43mca
  0

• Which hex for English?

  #25 opened 2 years ago by dapug
  0

• Please Include a Firmware HEX file that Supports Slice Engineering's PT1000 Thermistor

  #24 opened 2 years ago by ninp0
  0

• Fan shroud backside cooling

  #14 opened 5 years ago by elektronchika
  1

• Instruction manuals are out of date

  #23 opened 3 years ago by bendilts
  0

• Prusa Firmware 3.10.0 is out

  #22 opened 4 years ago by salmander
  1

• GCode interpreted incorrectly

  #21 opened 4 years ago
  0

• Prusament PC Blend

  #20 opened 4 years ago by Bohmut
  0

• XYZ Calibration issue

  #19 opened 4 years ago by Emili1116
  0

• Prusa FW 3.9.1 Released

  #18 opened 4 years ago by rickyh777
  1

• Why is the source in a zip file and not in the repo?

  #17 opened 4 years ago by casonclagg
  0

• PTFE Cutter for the BMG Extruder 5mm

  #16 opened 5 years ago by Nandox7
  0

• Extruder runs in reverse

  #15 opened 5 years ago by tdshank84
  0

• Unload filament MK3 prusa3d_fw_MK3_3_5_1.hex

  #2 opened 5 years ago by Dutchy-79
  3

• Too long Printer names

  #10 opened 5 years ago by 3d-gussner
  1

• Prusa Firmware as Fork

  #9 opened 5 years ago by 3d-gussner
  3

• Where shall I place the MK3s "#elif define" changes?

  #11 opened 5 years ago by elektronchika
  3

• M600 for new 'Color Print' results in printer pausing

  #13 opened 5 years ago by gummerch
  0

• MK2.5s Mosquito with high temperature thermistor (SliceE_HT) firmware not showing right temperature

  #12 opened 5 years ago by RiotShooter75
  4

• Temperature Issue on mk3s with Mosquito

  #6 opened 5 years ago by rcorgill
  2

• Z_MAX_POS issue on MK2.5s

  #8 opened 5 years ago by falconrh
  2

• bondtech_fw_MK3s-16_3_8_0 Load/Unload issues.

  #7 opened 5 years ago by Cub3squar3d
  1

• Sensor cover in STEP file

  #5 opened 5 years ago by albegouws
  0

• MK3S filament sensor stuck in loaded position

  #4 opened 6 years ago by HMPoweredMan
  0

• MMU2 version of MK3S filament sensor mod?

  #3 opened 6 years ago by keyboard-magpie
  3