Bully85/Sovol-SV04-Klipper
All Config for the SV04 to work with Klipper Mirror and Copy (include images and description)
Python
Issues
- 0
- 3
- 27
Kalibrierungswürfel
#36 opened by ginwer7619 - 0
Unable to parse move
#39 opened by aquari86 - 0
Won't switch carriage in dual mode.
#38 opened by StrikerTC - 0
Full guide from scratch?
#37 opened by petrovs12 - 15
Broke after update
#33 opened by willyhabr - 5
Unable to connect printer
#35 opened by ginwer7619 - 0
z_tilt - corrected values
#34 opened by jokker87 - 0
- 3
- 2
Problem with toolchange
#29 opened by RagDollino - 7
Disqord invitation link not working
#24 opened by Funkelfetisch - 2
Transfer macros and settings
#28 opened by RagDollino - 0
- 13
Unknown command:"SET_DUAL_CARRIAGE_MODE" and "Must home axis first: 0.000 0.000 0.200 [0.000]
#25 opened by scuba1976 - 9
- 13
Original Display
#23 opened by Malvus524 - 13
- 4
Is this good to use with sonic pad?
#3 opened by scuba1976 - 1
- 1
- 1
- 1
Are these screw designations correct?...
#17 opened by Dweinbach - 4
Reflash back to marlin possible ?
#5 opened by pleasanthill17 - 1
printer settings/general/gcode flavor=Marlin?
#18 opened by Dweinbach - 2
- 2
Raspberry PI model compatibility
#14 opened by Dweinbach - 0
Never mind delete me please
#12 opened by CornBred89 - 4
Klipper issue with variables.cfg
#11 opened by CornBred89 - 3
- 1
STM or GD chip?
#9 opened by az1984 - 15
how change extruder
#6 opened by scuba1976 - 0
sync tags from original klipper
#1 opened by gbkwiatt - 1