CopterExpress/clever-show

Issues

• Hi

  #86 opened 2 years ago by lylecp
  0

• support Ardupilot

  #81 opened 3 years ago by imnobodyet
  3

• Постоянные дисконнекты при запуске dronpoint_flight.py

  #80 opened 4 years ago by mituritsyn
  0

• Check if ROS services and nodes are available when perform any flying commands

  #21 opened 4 years ago by goldarte
  9

• Chrony doesn't synchronize time if the copter was turned on before wifi router.

  #32 opened 5 years ago by goldarte
  4

• Add workaround to test software in simulator

  #45 opened 5 years ago by goldarte
  2

• Add ability to rename copters directly from the server table

  #47 opened 5 years ago by goldarte
  3

• Add ability to view and edit client config file from selected drone

  #48 opened 5 years ago by goldarte
  1

• Incorrect start position with floor aruco-map

  #65 opened 5 years ago by Ianselot
  1

• Incorrect yaw angle during start animation

  #73 opened 5 years ago by Ianselot
  1

• Self-remove drones from server's table

  #67 opened 5 years ago by Ianselot
  3

• Function "Visual land" dont' working

  #72 opened 5 years ago by Ianselot
  0

• Software version not recognised if the project folder was downloaded as ZIP file instead of git clone

  #71 opened 5 years ago by timkondratiev
  1

• Add docker container for chrony for running on different OS

  #70 opened 5 years ago by goldarte
  0

• Release Server as AppImage for Linux, .app/.dmg for MacOS and .exe for Windows

  #69 opened 5 years ago by goldarte
  0

• Modify the "Start animation" button

  #66 opened 5 years ago by Ianselot
  1

• Make feedback to know when client is busy

  #60 opened 5 years ago by goldarte
  2

• Task manager is 'overinterrupted'

  #64 opened 5 years ago by goldarte
  0

• Make failsafe watchdog in standalone node.

  #59 opened 5 years ago by goldarte
  1

• Add script to copter's raspberry startup to connect first to wifi router with default settings and if connect fails switch to AP mode

  #34 opened 5 years ago by goldarte
  1

• Set up loggers correctly

  #24 opened 5 years ago by goldarte
  2

• Add ability to remove disconnected copter from table

  #40 opened 5 years ago by goldarte
  7

• Add ability to load parameter files to selected fcu's via mavros

  #50 opened 5 years ago by goldarte
  1

• Collect all needed telemetry on the client in the separate thread in special structure

  #53 opened 5 years ago by goldarte
  2

• Add ability to load clever launch files directly to client

  #35 opened 5 years ago by goldarte
  4

• Make unittests

  #51 opened 5 years ago by artem30801
  0

• Server: table update rate is slow

  #38 opened 5 years ago by goldarte
  2

• Client does not reconnect to server if server was restarted [server_qt]

  #46 opened 5 years ago by goldarte
  0

• Edit buttons layout

  #29 opened 5 years ago by artem30801
  2

• Check that start button works after pressing stop button.

  #41 opened 5 years ago by goldarte
  1

• Add ability to load full animation with takeoff and land without destroying logic of our animation parser

  #43 opened 5 years ago by goldarte
  2

• Repair auto build

  #44 opened 5 years ago by goldarte
  1

• Add frame delay option in client settings

  #42 opened 5 years ago by goldarte
  1

• Check client's time delta on server

  #37 opened 5 years ago by goldarte
  0

• Add server ip to /etc/chrony/chrony.conf and restart chrony when receive broadcast ip

  #20 opened 5 years ago by goldarte
  0

• Change copter config file on broadcast

  #36 opened 6 years ago by artem30801
  1

• Add flip function in animation file parser

  #26 opened 6 years ago by goldarte
  3

• Clever service doesn't restart when user send new aruco_map file.

  #31 opened 6 years ago by goldarte
  0

• Start time doesn't update after resume animation, so animation after pause is out of sync

  #33 opened 6 years ago by goldarte
  2

• Add ability to fly in gps coordinates

  #25 opened 6 years ago by goldarte
  0

• Add broadcast binding timeout

  #30 opened 6 years ago by artem30801
  0

• Use preflight check information to set up logic and permissions to start drone show

  #27 opened 6 years ago by goldarte
  1

• Sort table by ids of drones

  #28 opened 6 years ago by goldarte
  1

• Make preflight check

  #13 opened 6 years ago by goldarte
  3

• Add ability to send aruco_map files to connected drones

  #17 opened 6 years ago by goldarte
  1

• Add frame_id parameter to client_config

  #15 opened 6 years ago by goldarte
  1

• Add server start check on other available servers on lan

  #12 opened 6 years ago by goldarte
  1

• Add check for animation file

  #19 opened 6 years ago by goldarte
  0

• Server adds new line in table when client is reconnected

  #18 opened 6 years ago by goldarte
  1

• Repair file transfer

  #14 opened 6 years ago by goldarte
  1