DerSpatz/PCB-reflow-solder-heat-plate

Issues

• Not working at all. Immediate blows the 1117

  #21 opened 8 months ago by arwidcool
  1

• USB-C power connector

  #16 opened 9 months ago by platima
  1

• Instead of 4809 or 328P why not step into the 21st century and use a ATmega32U4?

  #20 opened 9 months ago by platima
  0

• Copper thickness on PCB not specified

  #19 opened 9 months ago by platima
  0

• No mention of PCB type it seems

  #18 opened 9 months ago by platima
  1

• Make the board compatible with ATMEGA328P-AU

  #4 opened 2 years ago by DominikPalo
  7

• Open 'Discussions' for repo

  #15 opened 9 months ago by platima
  0

• How many heating cycles does the PCB survive?

  #12 opened a year ago by manuel-rw
  5

• What package for the LM1117?

  #13 opened a year ago by crazyelectron-io
  0

• Tempted to start: is someone working on the issues on the to-do-list? Just to know.. Many thanks!

  #9 opened a year ago by ik0adr
  4

• Idea: use an NTC thermistor for sensing the heat-plate temperature

  #5 opened 2 years ago by DominikPalo
  3

• Made slight code changes to take advantage of Red LED... plus some design suggestions

  #11 opened a year ago by jgoldwein
  2

• Low resistance Heatplates - not getting hot

  #8 opened a year ago by ManCloud
  6

• Component base for self-assembly

  #10 opened a year ago by VTeselkin
  0

• Make Centroid (Pick and Place) files available

  #7 opened a year ago by Tyler135441
  1

• Are drain and source of inrush limiter mosfet reversed?

  #6 opened 2 years ago by MRo47
  0