JTechPhotonics/J-Tech-Photonics-Laser-Tool

Issues

• Request: Use document size for paper size

  #78 opened 2 years ago by Corgano
  2

• Not working in Linux with Inkscape 1.3

  #92 opened 9 months ago by RWL-69
  2

• Inkscape 1.2.2 Not running Jtech Photonics or Endurance Extensions, even though they show in the list

  #80 opened 2 years ago by JayC2469
  9

• Gcode generated via extension has wrong Y axis Coordinate

  #88 opened a year ago by lappa1
  1

• Footer executed before Tool Off cmd

  #90 opened a year ago by JuPrgn
  0

• FeatureRequest: Add line width

  #89 opened a year ago by o-bri
  0

• Compile with an empty body

  #52 opened 3 years ago by zorgoban
  3

• Compile with an empty body (no curves)

  #43 opened 4 years ago by skyline2016
  9

• ModuleNotFoundError: No module named 'svg_to_gcode'

  #56 opened a year ago by dfgianni
  9

• Laser don't power off at the end

  #87 opened a year ago by moossaa
  0

• can't find '__main__' module

  #86 opened a year ago by simond98
  0

• Extension greyed out

  #83 opened a year ago by Doubletop12
  10

• Only works with Inkscape V1.1.2

  #85 opened a year ago by Doubletop12
  0

• inkscape engrave - gcode and move head

  #82 opened 2 years ago by urobasa
  1

• License of the code?

  #84 opened a year ago by sumpfralle
  1

• No more "power-on delay" setting?

  #57 opened 3 years ago by rafzan
  5

• Definition of origin is bugged?

  #72 opened 3 years ago by AlainFarigoule
  3

• Diagonal lines are replaced by curves in generated GCode

  #79 opened 2 years ago by vibhoregit
  0

• NOT WORKING

  #77 opened 2 years ago by kurtpart
  2

• Traceback Error (No Gcode Generated) TypeError: stat: path should be string, bytes, os.PathLike or integer, not NoneType

  #76 opened 2 years ago by Liizam
  6

• Can't ouput Gcode

  #75 opened 2 years ago by phantomfsoc
  1

• No output file anymore

  #73 opened 3 years ago by 1GR3
  1

• Inkscape issue

  #74 opened 3 years ago by sugarl14
  1

• KeyError: 'boolean'

  #69 opened 3 years ago by Paulink-sys
  6

• Enhancement Request - Specify start point

  #65 opened 3 years ago by joeynuggetz
  1

• Error creating gcode

  #70 opened 3 years ago by dgg006
  4

• Gcode issues

  #68 opened 3 years ago by BallieK69
  5

• Lot of useless movements

  #67 opened 3 years ago by Carlsans
  4

• Error in Output Directory! message

  #60 opened 3 years ago by BCChad
  3

• Last cut always comes out wrong/problem with gcode gen

  #46 opened 3 years ago by nmeurer
  7

• trying to genaerate code but only a few lines of gcode

  #64 opened 3 years ago by danaskew99
  2

• After opening the preview, the plugin created the G file by itself

  #66 opened 3 years ago by 1129915719
  2

• Exception when start

  #63 opened 3 years ago by sstefanov
  4

• Add setting for dynamic output filename

  #61 opened 3 years ago by peschmae
  1

• Laser tool not showing up in Inkscape v1.1 as an Extension.

  #58 opened 3 years ago by StevenMarston
  2

• Curves are being generated as a chain of lines on GCode

  #55 opened 3 years ago by rafzan
  2

• top-left origin always bottom-left in gcode

  #53 opened 3 years ago by sninaber
  2

• Cannot engrave (just cutting) with grbl and inkscape

  #49 opened 3 years ago by dekiakbar
  4

• Offset in y axis

  #50 opened 3 years ago by agryson
  3

• Can you add an check box to remove/add the S0 from laser off cmd?

  #47 opened 4 years ago by murilobaliego
  3

• Negative offset values?

  #45 opened 4 years ago by Mazvy
  1

• Error when gcode header and footer paths not supplied [patch]

  #37 opened 4 years ago by themanyone
  1

• Top-left origin flips image

  #33 opened 4 years ago by bigtree908
  4

• gcode_compiler does not turn off laser! [patch]

  #38 opened 4 years ago by themanyone
  1

• Options missing for setting Z-Axis

  #41 opened 4 years ago by marcvs
  1

• Change Vertical Offset to Y Offset (enhancement & patch)

  #39 opened 4 years ago by themanyone
  2

• Desktop can't be selected as output folder

  #34 opened 4 years ago by nineff
  3

• Behaviour of path_depth

  #30 opened 4 years ago by tommy3001
  2

• Gcode scales beyond original vector dimensions.

  #31 opened 4 years ago by USAFAN
  0

• Scaling and orientation issue

  #32 opened 4 years ago by USAFAN
  0