JaredC01/Galileo2

Issues

• scratchy noises from Galileo 2 Z

  #52 opened 6 months ago by tofinnsch
  3

• G2Zxl backlash issue

  #70 opened 2 months ago by roadkill667242
  5

• Btt SB2209 USB

  #69 opened 3 months ago by LegionPleingaz
  0

• Shims on G2SA

  #68 opened 3 months ago by jpatrickoneal
  1

• CAD data mistakes

  #67 opened 3 months ago by ponkotsu1
  1

• Part broke during filament loading/tightening

  #37 opened 9 months ago by sharpner
  4

• Backlash issues.

  #65 opened 3 months ago by th3-gan-m4n
  1

• JosAr/G2_Umbilical_for_z_chain is not compatible with SB2209/SB2240

  #45 opened 7 months ago by luxflow
  2

• Slicing models for G2XL has strange fragments

  #62 opened 3 months ago by Surion79
  1

• Any plans to give us access to the filament path without disassembling the toolhead?

  #61 opened 4 months ago by laserbeak
  1

• Random crash

  #60 opened 4 months ago by trashous
  0

• G2SA missing PTFE information

  #50 opened 4 months ago by Cova
  4

• Feature Request: G2SA Filament Sensor

  #58 opened 4 months ago by KlausHans
  3

• cad files for skirts for z drives

  #11 opened 4 months ago by jdmontgomer
  2

• [G2E] Changelog from public beta?

  #44 opened 4 months ago by Alohacajun
  3

• CAD for G2Z

  #46 opened 4 months ago by drewowens715
  1

• G2E manual minor typo page 48

  #29 opened 4 months ago by mizz141
  0

• Does the manual need an update for the new kit batch?

  #18 opened 4 months ago by Bart97
  6

• Why is the Galileo2_extruder designed with a single-sided meshing gear

  #54 opened 4 months ago by MethodJiao
  2

• Hall effect filament sensor

  #34 opened 4 months ago by mcbeenb
  2

• Not a design issue, but where to get that special extruder gear?

  #43 opened 4 months ago by Hoeby
  2

• Klipper config question: run_current

  #59 opened 4 months ago by th0mpy
  1

• G2zxl fitment issue

  #56 opened 5 months ago by whezzel
  2

• Cable Cover is a bit too thin in one place.

  #55 opened 6 months ago by rafal-molotkiewicz
  0

• g2sa tensioner arm screw

  #53 opened 6 months ago by bosbmind
  1

• Cablechain hitting extruder motor

  #48 opened 7 months ago by Exeu
  3

• G2Z Kit RevB - Bearings F623-2RS

  #35 opened 7 months ago by aka-Ebo
  2

• [Feature Request] G2E with filament sensor options for use with ERCF

  #36 opened 7 months ago by Surion79
  7

• EBB SB2209 CAN Prevents Fan cover to be flush

  #27 opened 7 months ago by Shan723
  9

• G2E - collision SB2209 with stepper

  #33 opened 7 months ago by Asica10
  4

• Cad files

  #41 opened 7 months ago by izanamisu
  6

• New Batch Tolerances

  #21 opened 7 months ago by deremka
  4

• SB2209 (RP2040) not enough clearance w/Cover

  #26 opened 7 months ago by Ixian
  11

• BBT 2209 USB C port is hitting the motor.

  #16 opened 7 months ago by Tonykostansek
  5

• xxx36_Holder two out of four holes are of wrong size

  #39 opened 8 months ago by WizardUli
  0

• The g2_ptfe_cutting_tool.stl does not seem correct

  #38 opened 9 months ago by sundansx
  4

• G2E ercf dual sensor

  #31 opened 10 months ago by Wolffy00
  2

• G2SA Manual edit request

  #32 opened 10 months ago by dtdionne
  0

• G2S Skipping

  #28 opened 10 months ago by menthol1979
  1

• Tell me you haven't read the project page without telling me you haven't read the project page.

  #25 opened 10 months ago by dtdionne
  0

• Extruder motor testing

  #17 opened 10 months ago by kyper311
  4

• Shim use in G2Z

  #22 opened a year ago by apyarnold
  1

• CAD

  #24 opened 10 months ago by dtdionne
  1

• Missing manuals

  #10 opened a year ago by atbjk
  1