KoenVanduffel/CR-6_Klipper

Issues

• Extruder Temp to 0 during Probe Tare

  #17 opened 4 months ago by gineer
  2

• Issue at the start of 3d print on CR6-SE

  #16 opened 4 months ago by sairfan1
  2

• BED MESH default profile vs adaptive - best solution

  #15 opened 8 months ago by Takisg
  1

• Unsafe/Dangerous setting is the config files

  #14 opened a year ago by spamwax
  3

• START_PRINT different for PrusaSlicer

  #13 opened 2 years ago by MichielM77
  0

• TFT RX2/TX2 Pins ?

  #12 opened 2 years ago by eduncan911
  0

• call from super slicer to start_print macro

  #11 opened 2 years ago by oliverhbailey
  1

• Consolidate these CR6-SE scripts to be less confusing

  #10 opened 2 years ago by oliverhbailey
  1

• Precompiled firmware.bin's

  #9 opened 2 years ago by LordingtheVoid
  2

• CR-6 Max - trying this out

  #8 opened 2 years ago by figuerres
  4

• How configure for dgus_reloaded?

  #3 opened 3 years ago by Thinkersbluff
  3

• Klipper does not read/write CONFIG_SAVE results with BTT-SKR-CR6 printer.cfg

  #6 opened 2 years ago by Thinkersbluff
  1

• Recommended changes to TMC2209 settings

  #2 opened 3 years ago by Thinkersbluff
  2

• What about the stock LCD screen?

  #1 opened 3 years ago by eduncan911
  4