/allan_variance_ros

ROS compatible tool to generate Allan Deviation plots

Primary LanguageC++BSD 3-Clause "New" or "Revised" LicenseBSD-3-Clause

Allan Variance ROS

ROS package which loads a rosbag of IMU data and computes Allan Variance parameters

The purpose of this tool is to read a long sequence of IMU data and compute the Angle Random Walk (ARW), Bias Instability and Gyro Random Walk for the gyroscope as well as Velocity Random Walk (VRW), Bias Instability and Accel Random Walk for the accelerometer.

While there are many open source tools which do the same thing, this package has the following features:

  • Fully ROS compatable. Simply record a rosbag and provide it as input. No conversion required.
  • Written in C++ making use of rosbag::View means the rosbag is processed at maximum speed. No need to play back the bag file.
  • Designed for Kalibr. Will produce an imu.yaml file.

This tool is designed for Ubuntu 20.04. Attempting to use on another distro or version may require some code changes.

How to build

catkin build allan_variance_ros

How to use

  1. Place your IMU on some damped surface and record your IMU data to a rosbag. You must record at least 3 hours of data. The longer the sequence, the more accurate the results.

  2. Recommended Reorganize ROS messages by timestamp:

rosrun allan_variance_ros cookbag.py --input original_rosbag --output cooked_rosbag

  1. Run the Allan Variance computation tool (example config files provided):

rosrun allan_variance_ros allan_variance [path_to_folder_containing_bag] [path_to_config_file]

  1. This will compute the Allan Deviation for the IMU and generate a CSV. The next step is to visualize the plots and get parameters. For this run:

rosrun allan_variance_ros analysis.py --data allan_variance.csv

Press space to go to next figure.

Example Log

3 hour log of Realsense D435i IMU with timestamps already re-arranged.

Acceleration Gyroscope

Example terminal output:

ACCELEROMETER:
X Velocity Random Walk:  0.00333 m/s/sqrt(s)  0.19983 m/s/sqrt(hr)
Y Velocity Random Walk:  0.01079 m/s/sqrt(s)  0.64719 m/s/sqrt(hr)
Z Velocity Random Walk:  0.00481 m/s/sqrt(s)  0.28846 m/s/sqrt(hr)
X Bias Instability:  0.00055 m/s^2  7173.28800 m/hr^2
Y Bias Instability:  0.00153 m/s^2  19869.01200 m/hr^2
Z Bias Instability:  0.00052 m/s^2  6701.58000 m/hr^2
X Accel Random Walk:  0.00008 m/s^2/sqrt(s)
Y Accel Random Walk:  0.00020 m/s^2/sqrt(s)
Z Accel Random Walk:  0.00007 m/s^2/sqrt(s)
GYROSCOPE:
X Angle Random Walk:  0.00787 deg/sqrt(s)  0.47215 deg/sqrt(hr)
Y Angle Random Walk:  0.00987 deg/sqrt(s)  0.59204 deg/sqrt(hr)
Z Angle Random Walk:  0.00839 deg/sqrt(s)  0.50331 deg/sqrt(hr)
X Bias Instability:  0.00049 deg/s  1.76568 deg/hr
Y Bias Instability:  0.00136 deg/s  4.88153 deg/hr
Z Bias Instability:  0.00088 deg/s  3.15431 deg/hr
X Rate Random Walk:  0.00007 deg/s/sqrt(s)
Y Rate Random Walk:  0.00028 deg/s/sqrt(s)
Z Rate Random Walk:  0.00011 deg/s/sqrt(s)

Kalibr

Kalibr is a useful collection of tools for calibrating cameras and IMUs. For IMU calibration it needs the noise parameters of the IMU generated in a yaml file. allan_variance_ros automatically generates this file file as imu.yaml:

#Accelerometer
accelerometer_noise_density: 0.006308226052016165 
accelerometer_random_walk: 0.00011673723527962174 

#Gyroscope
gyroscope_noise_density: 0.00015198973532354657 
gyroscope_random_walk: 2.664506559330434e-06 

rostopic: '/sensors/imu' #Make sure this is correct
update_rate: 400.0 #Make sure this is correct

Allan Variance ROS Evaluation

IMU Noise Simulator

Thanks to @kekeliu-whu who contributed an IMU noise simulator is based on the Kalibr IMU noise model. You can generate a rosbag of simulated IMU noise and run allan_variance_ros to verify the tool is working. As shown in PR ori-drs#24 accuracy is quite good.

To generate simulated noise

rosrun allan_variance_ros imu_simulator [path_to_output_bag_file] [path_to_simulation_config_file]

A simulation config file is provided in allan_variance_ros/config/simulation/imu_simulator.yaml

To test Allan Variance ROS on simulated rosbag

rosrun allan_variance_ros allan_variance [path_to_folder_containing_bag] [path_to_config_file]

A config file is provided in allan_variance_ros/config/sim.yaml

Additional Example bags

Some additional rosbags of real IMU data for different sensors is available here. Thanks to Patrick Geneva.

Author

Russell Buchanan

References