OpenPTrack/open_ptrack_v2
OPT v2 "Gnocchi" - adding object tracking and pose recognition
C++BSD-3-Clause
Issues
- 2
Not able to run multicameracalibration
#147 opened by tobiasonkes - 0
Have Problems to start to Realsense cammera
#146 opened by tobiasonkes - 5
Writing a wrapper for Orbbec Astra
#111 opened by joaocandre - 6
opt_calibration_results.launch not saved
#144 opened by colinbouvry - 2
SHIFT KEY
#143 opened by colinbouvry - 0
README.md edit for Instalation Instructions?
#142 opened by AlessandroMelino - 2
Manual ground plane doesn't work
#141 opened by VanDerSloth - 5
- 1
RLException: Unable to contact my own server
#139 opened by plbergeron - 0
rosdep : not found
#138 opened by SimeonOA - 18
Question on multi-camera network setup
#137 opened by plbergeron - 2
Does this code include a solver?
#136 opened by antithing - 0
Joint Confidence Always 1 in Pose Annotation
#135 opened by duremovich - 0
Headless installation support
#134 opened by Surya059 - 0
- 3
3rd camera dies during multi-camera pose tracking
#132 opened by muella91 - 3
Multi camera tracking from a single host PC
#125 opened by cmdrogogov - 1
Compatibility with the ZED Mini
#131 opened by muella91 - 2
Using Jetson Xavier NX, Jetson Nano
#127 opened by raspberryHummus - 1
Installation guide
#130 opened by ugintl - 0
Thresholding depth for YOLO object detections
#129 opened by lguillain - 2
- 0
OpenPTrack v2 latency
#128 opened by mnemllr - 0
Aruco markers for object poses
#126 opened by muella91 - 1
- 1
Single camera object tracking for Zed doesn't work without person tracking enabled
#106 opened by bsubbaraman - 0
- 5
Frame rate too low
#123 opened by muella91 - 0
extract the point cloud of the human body
#121 opened by kdy1999 - 11
skeleton joints to udp to blender
#110 opened by 3blake7 - 4
Dual RealSense Person Tracking Setup
#116 opened by Julian243 - 2
Receiving double JSON in one UDP message
#120 opened by muella91 - 1
New intrinsic calibration if new checkerboard size?
#119 opened by mnemllr - 3
Multiple Cameras/Dockers on one Computer
#118 opened by muella91 - 5
Multi-Camera Network issues
#103 opened by muella91 - 6
Getting the orientation of the skeleton joints
#115 opened by muella91 - 4
Object tracking data
#117 opened by muella91 - 1
- 1
Update drivers for Docker installation
#98 opened by bsubbaraman - 4
OpenPTrack skeleton joints model
#113 opened by mnemllr - 0
Filter object detections into different topics for YOLO-based person tracking
#109 opened by bsubbaraman - 0
Upgrade to YOLOv3
#108 opened by bsubbaraman - 0
Catkin build vs catkin_make
#107 opened by msacco22 - 0
Any of the packages dependent on python 2?
#105 opened by msacco22 - 2
IP adress for NTP and multi-camera calibration
#104 opened by muella91 - 2
- 0
World reference coordinate system
#99 opened by muella91 - 1
Intrinsic Calibration
#100 opened by muella91 - 4
Kinectv2 not found
#96 opened by muella91 - 2