PiSupply/PiJuice

Issues

• How to get the decimal part of the battery level?

  #1067 opened 5 months ago by glennjw
  0

• Way to use a physical trigger to Disable Wakeup?

  #1065 opened 5 months ago by quitmeyer
  3

• PiJuice Zero - Shuts down Raspberry Pi 2W abruptly without warning

  #1064 opened 5 months ago by ollax452
  0

• literally nothing working although installed

  #1056 opened 7 months ago by theredhorseman42
  9

• RTC not working on PijuiceZero with Raspberry Pi OS Lite 64 bit bookworm

  #1063 opened 5 months ago by mroelandts
  4

• Best way to power screen and Pi?

  #1058 opened 6 months ago by mattisengstedt
  1

• Pijuice service not starting - Dependency failed for pijuice.service

  #1062 opened 6 months ago by mroelandts
  3

• Problems with PiJuice overheating

  #1025 opened 6 months ago by sebastianpiccoli
  10

• What could cause system switch to shut off during runtime?

  #1061 opened 6 months ago by funkyfourier
  1

• PiJuice Zero Led and PiJuice battery connector references

  #1060 opened 6 months ago by hugokernel
  1

• Unable to get Pi4 to run off Pijuice.

  #1057 opened 6 months ago by cassius-
  10

• Possible to connect a custom low power led?

  #1059 opened 6 months ago by mattisengstedt
  1

• PiJuice: global failure, randomly decides to stop working. The battery must be removed/reinserted

  #1034 opened 8 months ago by KevinJoss
  5

• Failed to execute command "/usr/bin/pijuice_gui"

  #1050 opened 7 months ago by BigDogsDad
  7

• Wayland not working in Bookworm, X11 does though.

  #1048 opened 7 months ago by allphasepi
  2

• Software not opening.

  #1051 opened 7 months ago by Samu0535
  2

• Pi 5

  #1040 opened 8 months ago by sevdh
  8

• PiJuice on Rpi 3b+ with Raspberry Pi OS Bookworm

  #1049 opened 7 months ago by larsbjorndal
  4

• PiJuice Hat goes dark

  #1042 opened 7 months ago by johnbradley
  4

• Wakeup on charge not saving correctly with pijuice_cli

  #1002 opened a year ago by markdepalma
  7

• Control GPIO with pi shut down?

  #1045 opened 8 months ago by quitmeyer
  5

• Cannot configure PiJuice Zero to turn RPi ON when USB is connected (without pressing button)

  #1046 opened 8 months ago by mike6789
  2

• PiJuice does not respond to i2c-commands and reports at 0x41

  #1039 opened 8 months ago by fjpdevries
  1

• Wakeup settings lost when battery is exhausted

  #1035 opened 8 months ago by hplato
  2

• Batteries: Can I hook 3.7v lipos in parallel? Can i connect lipos that have just two wires?

  #1044 opened 8 months ago by quitmeyer
  2

• Cannot auto startup from guide using latest bullseye (includes my fix)

  #1043 opened 8 months ago by quitmeyer
  1

• A question about usage, specifically powering up

  #1036 opened 8 months ago by ThomasDorf
  1

• Lost Bracket

  #1037 opened 8 months ago by tymoshmtb
  1

• PiJuice won't communcicate with GPIO header - failure to communicate issue.

  #1026 opened 9 months ago by nlandas
  5

• -bash: /usr/bin/pijuice_cli: No such file or directory

  #1014 opened 10 months ago by ECHEngineering
  21

• Incorrect temperature reading using fimware 1.5+

  #1033 opened 8 months ago by MediaMeasure
  1

• installation did not add user pijuice to the group i2c

  #1030 opened 9 months ago by bablokb
  5

• Start RPI when Powerup on USB

  #1024 opened 9 months ago by BramWerbrouck
  7

• Section "Sync RTC time at boot" - legacy instructions

  #1029 opened 8 months ago by bablokb
  3

• How to configure "boot on power"?

  #1031 opened 9 months ago by bablokb
  2

• Powering off PI juice when power is still connected

  #1028 opened 9 months ago by lmiles-sosub
  0

• Battery NON_PRESENT

  #1011 opened a year ago by nmoorcroft
  2

• Modiffication of pijuice_sys.py: watchdog works during reboot process

  #1023 opened 9 months ago by jmirek
  0

• Current hardware revisions and changelogs for pijuice HAT and pHAT

  #1001 opened a year ago by uGiFarukh
  1

• RTC resets if PiJuice battery charge dies

  #1016 opened 9 months ago by Wahaj6Ahmad
  6

• Thoughts on cooling

  #1009 opened a year ago by EnnPeeTee
  1

• Communication error

  #1017 opened 9 months ago by BramWerbrouck
  8

• Pijuice install does not work. No error except for a "Failed to execute child process /usr/bin/pijuice_gui" (no such file)

  #1015 opened 10 months ago by Bonzadog
  6

• 24/24 7d/7 system on solar panel + battery. How to prepare things?

  #1013 opened 10 months ago by OhSoGood
  0

• PiJuice DATA_CORRUPTED

  #1012 opened 10 months ago by rithwikmakesthings
  2

• COMMUNICATION_ERROR with Model 3B+

  #1005 opened a year ago by nmoorcroft
  9

• Question: Best/Safest/Largest wire gauge size for J4

  #1010 opened a year ago by jmont
  0

• New User: Confusion of missing pogo pin and information regarding DIP switch settings

  #1008 opened a year ago by EnnPeeTee
  2

• Stacking pHats on PiJuice Zero / suitable case for batteries + one pHat

  #1006 opened a year ago by r-colvin
  4

• Python3-urwid preventing install?

  #1003 opened a year ago by MattGeale
  4