Issues
- 0
Slicer Profile and 200x200 background
#94 opened by huskyte - 0
- 0
More stringent differentiating between enc1.0 and enc2.0 panel parts (bottom panel)
#92 opened by Alphaprot - 5
[DANGER] Grounding issues
#87 opened by olivbd - 0
How were those website illustrations made?
#91 opened by robertlugg - 0
- 1
Unable to open files in fusion 360
#72 opened by princerufus - 0
Can't find Bracket board
#86 opened - 0
Default orientation of 3.1 XY joiners is wrong
#83 opened by etotheipi - 2
Would you please make a Cura profile?
#81 opened by Tylersuard - 3
- 0
Door Hinge Frame does not work with 6mm panels
#77 opened by Spotigus - 0
Ratrig V-Core-3
#74 opened by Ackerbude - 1
A printable electronics mounting solution?
#71 opened by mikejwaters - 0
No 2.85mm/3mm filament filament guide available
#69 opened by billyd60 - 0
panel_electronics_duet3_mb6hc_rpi_400.dxf contains holes for an other mainboard
#67 opened by RandomAccountForTest - 1
Typo in BOMfor 500mm Variant
#65 opened by bhannawa - 1
- 0
[FR] Change orientation of front Z-rails
#60 opened by top-gun - 0
Changed to printed parts
#52 opened by raymondjstone - 1
- 6
Duplicate lines in panel DXF
#33 opened by elcojacobs - 0
Wrong Fan default config for Duet 3 Mini
#41 opened by HelgeKeck - 0
Back panel should be slightly smaller to have tolerance between the extrusions
#34 opened by elcojacobs - 0
- 1
DXF panel files only in inches
#23 opened by HelgeKeck