SICKAG/sick_safetyscanners

Issues

• SICK nano M1 error and lost data

  #150 opened 6 months ago by Raymond601
  5

• sick_safetyscanner_base error code 2735874052

  #151 opened 6 months ago by Neubati
  1

• Deadlock occurs inside the Command::waitForCompletion().

  #149 opened 7 months ago by suffeeen
  1

• Wrong received checksums in meta data

  #141 opened 2 years ago by nicostudt
  5

• Error when using Microscan3 with Lidar-loc and running package sick_safetyscanner.

  #140 opened 10 months ago by nguyendo1403
  5

• Monitoring case of Sick microscan3 ROS

  #137 opened 10 months ago by nguyendo1403
  6

• ros data rotate 90° compared with the actual contour

  #136 opened 10 months ago by Raymond601
  5

• out of rang access to scan points vector in `SickSafetyscannersRos::receivedUDPPacket`

  #115 opened 10 months ago by kou-kikutake
  3

• Out of range bug still present in 1.0.8

  #107 opened 10 months ago by reinzor
  6

• potential program crash risk due to data overflow

  #146 opened a year ago by Raymond601
  1

• Undefined behaviour in Cola2Session and Command?

  #144 opened a year ago by mlederhi
  2

• Monitoring case switch using the ROS driver

  #143 opened 2 years ago by pablo-sick
  2

• Missing timestamp in OutputPathsMsg

  #138 opened 2 years ago by Finn2708
  1

• Probem reading data from MicroScan 3 using C++ API on Linux

  #123 opened 2 years ago by geofftreen
  2

• ROS node crashed

  #133 opened 2 years ago by renguorong
  3

• race condition in Colla2Session among m_pending_commands_map

  #114 opened 2 years ago by kou-kikutake
  3

• Wrong min angle

  #129 opened 2 years ago by zhibopotame
  20

• Problem about getting data from nano3 (Two nano3 lidars)

  #127 opened 2 years ago by jiangzuwu
  3

• Handling of socket disconnection and failure to establish connection

  #122 opened 2 years ago by smalik007
  6

• Abnormal radar data publishing problems during operation

  #117 opened 2 years ago by micah-space
  12

• ros driver consulting

  #110 opened 2 years ago by liangchengcheng000
  7

• ROS node keep running and reconnect when lost data form lidar

  #134 opened 2 years ago by Playfish
  2

• Release 1.0.9

  #119 opened 2 years ago by robertwil
  2

• what's the transform of the scan link?

  #120 opened 2 years ago by 12cp38
  4

• Under what circumstances will this driver be killed by the system or to end running on its own?

  #104 opened 2 years ago by Blues686
  4

• Use sick_safetyscanners in Windows

  #124 opened 2 years ago by toan70411hd91
  1

• Data output jitter on nanoscan3

  #121 opened 2 years ago by oren-hinkis
  3

• Abnormal radar data publishing problems during operation

  #116 opened 2 years ago by micah-space
  1

• Costmap dynamic obstacle is not updated.

  #113 opened 2 years ago by XieWup
  2

• Ghost points seen in the laser scan

  #112 opened 2 years ago by Soft-illusion
  3

• sick nanoscan3 LIDAR stops working after a period of time.

  #102 opened 3 years ago by kayoussef
  2

• Scanner Installation

  #108 opened 3 years ago by SKazemi89
  1

• Safety Fields

  #106 opened 3 years ago by Mky07
  2

• Issues with Port UDP when use LLS RTE only IPC

  #101 opened 3 years ago by MDBean
  2

• How to access Sick safety scanner data in docker container

  #103 opened 3 years ago by harshkakashaniya
  2

• Under what circumstances will this driver be killed by the system or to end running on its own?

  #105 opened 3 years ago by Blues686
  0

• time_increment issue

  #99 opened 3 years ago by yifeilang
  2

• Missing data when using field of view settings on microScan3

  #97 opened 3 years ago by mehditlili
  3

• streaming point cloud data

  #100 opened 3 years ago by jeojeda
  3

• No sensor data after sensor restart

  #98 opened 3 years ago by robertwil
  3

• diagnostic warn "Frequency too high"

  #96 opened 3 years ago by FlyHan
  2

• no data when disconnect and reconnect

  #95 opened 3 years ago by FlyHan
  4

• Difference between angle_start/end and angle_min/max

  #94 opened 3 years ago by GuyWithCookies
  5

• NanoScan3 no output data when startup on reboot

  #92 opened 3 years ago by thanarnop
  3

• Can`t run two sick_safetyscanners at the same time

  #85 opened 3 years ago by fatgenius
  15

• channel 2 data output lost

  #86 opened 3 years ago by Raymond-601-cmd
  2

• If NanoScan3 packet loss(M2 error code), can we receive alarm by ROS?

  #89 opened 3 years ago by Tompili
  4

• About the problem that the nano3 ros package cannot build a map

  #91 opened 3 years ago by ju-mingyue
  1

• how to get time stamp for synchronization from sick

  #88 opened 4 years ago by ouyangle8794
  1

• How do I make sure the arrow is 90 degrees?

  #87 opened 4 years ago by Tompili
  1