Schm1tz1/ESPressIoT

Issues

• Plotter for Temperatures

  #5 opened 2 years ago by Schm1tz1
  0

• Allow different configuration files and selection

  #6 opened 8 years ago by Schm1tz1
  0

• SPIFFS in WWW-Interface and Favicon

  #4 opened 8 years ago by Schm1tz1
  0

• Pretty, scalable WWW-Interface

  #3 opened 8 years ago by Schm1tz1
  3

• MQTT Interface

  #1 opened 2 years ago by Schm1tz1
  6

• License....

  #17 opened 3 years ago by spoetnik
  1

• Roman - For your amusement...

  #16 opened 4 years ago by VastSky
  1

• I'm wishing for: Use ds18b20 sensor and add local 128x64 IC2 OLED display

  #11 opened 4 years ago by VastSky
  4

• Add a support of PT100RTD sensors and Adafruit MAX31865

  #14 opened 4 years ago by ZH-A
  3

• No PID control if there is no network connection

  #13 opened 5 years ago by ThomasPu89
  2

• Tuning loop not doing correct Peak-To-Peak-Temperature

  #2 opened 8 years ago by Schm1tz1
  3

• non blocking oled driver...

  #12 opened 5 years ago by jeanrocco
  13

• Grinder timer support

  #10 opened 7 years ago by arcidodo
  1

• Write PID-Log to file

  #7 opened 8 years ago by Schm1tz1
  1

• Firmware update via SPIFFS-Upload

  #8 opened 8 years ago by Schm1tz1
  1