Snapmaker/SnapmakerCuraPlugin

Issues

• Don't get a message "Send to <IP>"

  #88 opened 10 months ago by RaBuAc
  2

• Build Plate Temperature Wrong

  #90 opened 7 months ago by AlexanderWMacFarlaneIV
  3

• Does not wait for temp on extruder change.

  #83 opened a year ago by hilmerhall
  3

• First layer temps not right when sending via wifi

  #87 opened a year ago by davide1a
  0

• Snapmaker Original

  #76 opened 2 years ago by rubanunes
  3

• Extruder Change happens in wrong place

  #59 opened 2 years ago by e-maddin
  2

• Consistent Error When Slicing

  #81 opened a year ago by JackTR1357
  1

• Artisan always prints using the left extruder

  #50 opened a year ago by raleksandar
  3

• [FR] Use ufp files instead of gcode

  #71 opened a year ago by jellespijker
  1

• Cant connect to printer through wifi

  #77 opened a year ago by pwvandeursen
  2

• Snapmaker 2.0 Dual Print Issue

  #78 opened a year ago by RedactedUser404
  1

• Bed Misalignment

  #79 opened a year ago by Andreuha
  1

• [FR] store network token in system keyring when possible

  #70 opened 2 years ago by jellespijker
  2

• doesn't send files over wifi and does not generate thumbnail preview

  #75 opened 2 years ago by colombod
  6

• Printing an object with two hotends: temperatures mixed between hotends

  #62 opened 2 years ago by Braintoe
  2

• J1 plugin for Cura

  #72 opened 2 years ago by oSoDirty
  4

• unable to change extruder speed printing

  #63 opened 2 years ago by Pitive
  2

• Feature Request: Right extruder does not start heating until Left extruder and bed are up to temperature

  #29 opened 2 years ago by evilC
  5

• Materials Have Wrong Retraction Settings

  #48 opened 2 years ago by jledgett
  5

• Can't find Snapmaker Artisan in "non-networked printer" menu

  #58 opened 2 years ago by PixelJonas
  1

• Maximum gcode size over wifi is less then 16MB?

  #49 opened 2 years ago by kanocz
  1

• Temp and retraction values

  #38 opened 2 years ago by hiltpatr
  2

• Build volume is incorrect / Right extruder cannot reach X=0

  #42 opened 2 years ago by evilC
  0

• Cura 5.2.1 puts Snapmaker data into other printers' GCode

  #37 opened 2 years ago by Miq1
  2

• Snapmaker J1 plugin for Cura not connecting to J1 printer over wifi

  #32 opened 2 years ago by alziepen
  3

• J1 profile does not import correct values for custom materials

  #28 opened 2 years ago by evilC
  5

• Print speed setting greyed out

  #30 opened 2 years ago by evilC
  2

• Custom Materials do not use correct print temperature

  #25 opened 2 years ago by evilC
  3