SpenceKonde/ATTinyCore
Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8
CNOASSERTION
Issues
- 5
SSL for site drazzy.com is expired
#847 opened by spellbinder103 - 2
ATtiny core
#870 opened by Gi76t - 4
Is aTTiny core broken?
#861 opened by terrypin999 - 1
Malloc problem
#863 opened by FroggyCorp - 5
Attiny2313: error: 'PCIE' was not declared in this scope; error: 'PCIF' was not declared in this scope
#874 opened by badomenspeaking - 1
ATTinyCore compilation
#872 opened by NickD9 - 1
Add support for ATtiny20
#857 opened by yahaggach - 2
problem error
#845 opened by anwfeb - 5
Certificate expired for drazzy.com
#869 opened by ctnadovich - 3
Help with Attiny85 RX Uart Pin
#862 opened by GabrielSCorrea - 0
- 22
- 2
JSON link not working
#864 opened by ProAro - 1
Cannot upload bootloader to Attiny85
#860 opened by legalmachinery - 7
System Clock change from 1MHz to higher internal clock creates skewed ADC results- Prescaler?
#858 opened by MD2240 - 3
SPI has MODE2 and MODE3 swapped
#831 opened by domnulvlad - 0
DHT.h not able to compile
#856 opened by IAmAPhysicist - 0
Problem on compilation with malloc
#855 opened by FroggyCorp - 0
Support for ATTiny 416?
#849 opened by eugali - 14
Fails to install
#815 opened by Alt0S4x - 1
- 1
ATtiny841 PWM works with 1.5.2 but not with 2.0.0
#813 opened by bjfischb - 4
- 2
attinycore library not compiling on arduino ide
#835 opened by Budda23 - 10
No serial on ATiny841 2.0.0 Codeline
#787 opened by ahshah - 0
- 15
- 7
ATtinyCore installation failed due to expired tls certificate for azduino.com
#819 opened by schorsch3000 - 1
Attiny core 1.5.2
#817 opened by smdg49 - 8
ATTinyCore does not appear in Boards Manager
#820 opened by roger-tannous - 3
Install error Linux
#826 opened by Eggberry - 5
- 0
ATtiny1634 Pinout seems off
#825 opened by Shockedmaker - 2
arduino-cli: installation error
#816 opened by pstolarz - 10
- 6
Serial Corruption on new Tiny85 chips
#806 opened by ahshah - 1
- 1
ATTinyCore and RFM69 issue / help
#808 opened by SpenceKonde - 6
Is there an equivalent of TinyPinChange (that exists on the Digispark Pro repo) for the Standalone Attiny167?
#792 opened by Rimbaldo - 5
- 5
Pin Change Interrupt not triggering when using PB2 (PCINT10) on Attiny167 (and Digispark PRO)
#796 opened by Rimbaldo - 19
- 1
DigiKeyboard.h: No such file or directory
#797 opened by proJM-Coding - 1
SPI Compile problems using T84 hardware
#786 opened by JohnOH - 2
Compile error when using SPI library
#795 opened by jagot - 3
devices firmware to load them as a libgpiod driver.
#794 opened by adminy - 3
digitalPinToInterrupt on ATTiny841
#791 opened by 3sigma - 4
Fails to install due to Tool avrdude is not available for your operating system
#777 opened by usr97629238 - 2
- 4
Board Manager URL not working
#775 opened by Cellgalvano