Ultimaker/CuraEngine

Issues

• Run CuraEngine from commandline with EnginePlugins

  #2182 opened 19 days ago by EmJay276
  0

• Error on generating G-Code from STL

  #2176 opened a month ago by simeonovp
  0

• [5.6.0] Top and bottom layer height error with adaptive layers

  #2171 opened 2 months ago by DeathStar36
  0

• [5.9.0-beta.1] Coasting causes moves to Z=0

  #2157 opened 2 months ago by Hello1024
  0

• The algorithm for finding the optimal path does not take into account the combining mode

  #2143 opened 3 months ago by evgenius123
  0

• Potentially incorrect function `ceil_divide_signed`

  #2005 opened 4 months ago by chungwong
  2

• Why did you delete standardprojectsettings?

  #2109 opened 5 months ago by mqtpaxifu
  2

• Where do I add this code to?

  #2102 opened 6 months ago by T9Air
  0

• Nozzle preheat added before start g-code

  #2099 opened 6 months ago by PatrikKopriva
  1

• Spiralize ignoring gaps in walls

  #2098 opened 6 months ago by GregValiant
  1

• Slice error with multi-filament interlocking, with boundary avoidence = 0

  #2101 opened 6 months ago by Noisyfox
  2

• Can I modify the slicing algorithm based on the Curaengine source code？

  #1966 opened a year ago by biexiangi
  4

• No valid windows executable of CuraEngine_plugin_infill_generate is build with VS2022 17.10 - Slicing always fails

  #2090 opened 7 months ago by EmJay276
  0

• Arcus error 1884

  #1920 opened a year ago by zhangjiangzhao123
  1

• documentation error (conan install and config)

  #2072 opened 8 months ago by petaflot
  1

• CuraEngine 5.6.0 fails to build on building from the source Cura 5.6

  #1998 opened 8 months ago by TechMaverik
  3

• Unable to compile on Ubuntu 22.04

  #2070 opened 8 months ago by grepwood
  2

• Can't get this program to work. Neither with apt or building from source.

  #2017 opened 8 months ago by GAMPR
  1

• Please start building each version before merging it to the main branch

  #2071 opened 8 months ago by grepwood
  3

• The documentation is wrong

  #2069 opened 8 months ago by grepwood
  1

• Illogical protobuf dependency conflict in CuraEngine 5.7.0

  #2068 opened 8 months ago by grepwood
  1

• [5.8.0] part of product missing using CuraEngine CLI

  #2066 opened 8 months ago by MrMonkeyManiac
  1

• [ERROR] Inherited JSON file "fdmextruder" not found.

  #2064 opened 9 months ago by DiegoHerrera1890
  0

• Tree support tip generation leaves corners unsupported

  #2037 opened 10 months ago by richfelker
  1

• CuraEngine build failed on Windows 11

  #2035 opened 10 months ago by Falindir
  6

• CuraEngine 5.5.0/5.6.0/5.7.0 fails to build on building from the source

  #2019 opened 10 months ago by Dogm
  4

• Wrong extrusion moves with fractional-layer support and Z-hop

  #2022 opened a year ago by richfelker
  1

• CuraEngine from command line fails to accept default_value from non-leaf config json nodes

  #2027 opened a year ago by richfelker
  0

• Poor communication regarding missing max flow rate feature

  #1990 opened a year ago by L0laapk3
  3

• CuraEngine - Zero print time, zero filament used, Stopping process because there are no non-empty layers.

  #2004 opened a year ago by kvostyc
  1

• CuraEngine::LayerPlanTest/AllCombinations/AddTravelTest.NoRetractionIfDisabled/20 fails because sliceDataStorage.storage.supportLayers hasn't been initialized properly

  #2008 opened a year ago by amorozov
  1

• build failure with neargye-semver

  #1991 opened a year ago by thecampbells384
  1

• Wall inclination on bridges when they should be 90º

  #1987 opened a year ago by ideechaniz
  0

• Fluid Motion Smoothing Fails to Smooth in Some Cases

  #1982 opened a year ago by mfish38
  1

• Different print times with same settings but different nozzle (for single wall object)

  #1976 opened a year ago by Consti3D
  0

• .skp (skechtup file) support for importing file

  #1970 opened a year ago by LightBridge16
  1

• [5.3.0] Retraction speeds / length not correctly applied for IDEX (and possibly other multi-extruder printers)

  #1866 opened 2 years ago by TheThomasD
  4

• Can I modify the slicing algorithm based on the Curaengine source code？

  #1965 opened a year ago by biexiangi
  0

• Invalid setting '13' is not a valid 'settings.compiler.version' value.

  #1881 opened a year ago by batot1
  10

• How to find Visual studio solution and build it

  #1938 opened a year ago by actualyang
  4

• with libfmt10 build fail

  #1937 opened a year ago by Pro-pra
  4

• Arcus error

  #1884 opened 2 years ago by flashstacks06
  5

• Incorrect values in the StartUp G-code "Replacement Patterns"

  #1912 opened a year ago by GregValiant
  0

• Incorrect printf format string in InfillTest causes test failure on 32-bit architectures

  #1897 opened a year ago by onitake
  0

• ERROR: Invalid setting '13' is not a valid 'settings.compiler.version' value.

  #1905 opened a year ago by MajliTech
  2

• [5.x.x] CuraEngine crashes when slicing walls

  #1895 opened a year ago by Dogm
  5

• [5.x.x] Bug with random CW/CCW wall directions in thin walls

  #1874 opened 2 years ago by Dogm
  0

• Is there a plugin feature? Could I use it to set different temperatures for different layerparts in a model?

  #1892 opened a year ago by zhaxinmeng
  0

• Unable to build CuraEngine.

  #1887 opened 2 years ago by kelvin6k
  1

• cannot connect to Cura using "./build/Debug/CuraEngine connect 127.0.0.1.49674" command

  #1883 opened 2 years ago by JinboYang94
  0