Pinned Repositories
16-bit-PIC-Microcontroller-to-Arduino-Multiple-Data-Transfer-using-UART
This Program is for both Transmitter side and Receiver side. This will transfer multiple variable value at a same time from 16 bit PIC24F to Arduino using UART Communication. The transmitter part will be interrupt by a timer of PIC24F. The receiver side will decode and separate all the received variable value.
Arduino-I2C-Analog-Data-Transfer
Arduino-UART-Communication-for-Multiple-Variable-Transfer
It will transfer multiple variable value at a same time and Receiver side can extract the different value individually.
Bit-wise-operation-in-8-bit-Microcontroller
Digital-I-O-in-PIC24F-16-bit-microcontroller
Digital-Switch-in-PIC24F-16-bit-microcontroller
LED-and-Switch-using-PIC24F-16-bit-microcontroller
Live-Weather-Display-OLED-Display
PWM-in-STM32
This program will show how we can generate multiple PWM wave from STM32 and vary the duty cycle of the PWM wave individually.
Timer-setup-in-PIC24F-16-bit-microcontroller
UttamBasu's Repositories
UttamBasu/Arduino-I2C-Analog-Data-Transfer
UttamBasu/Analog-Voltage-Read-in-Arduino
UttamBasu/Arduino-I2C-String-Transfer
UttamBasu/Arduino-SPI-Communication-Basic
UttamBasu/attiny1627-analog-demo-mplab-mcc
This demo demonstrates the Programmable Gain Amplifier (PGA) in the ADC.
UttamBasu/avr128da48-qt7-touch-xpress
This example demonstrates touch application with data visualization on AVR128DA48 Curiosity Nano and Curiosity Nano Touch Adapter Kit with the QT7 extension board. Deliberately designed using MPLAB Xpress.
UttamBasu/avr128db48-overcurrent-protection-mplab-mcc
This repository provides a MCC MPLAB® X project for a core independent overcurrent protection and handling with auto-calibration of current draw trigger level using the internal OPAMP, TCD and AC.
UttamBasu/DATASHEET
Datasheets of various products on www.thinkrobotics.in
UttamBasu/Digital-Techometer-using-Arduino-and-OLED-Display
UttamBasu/dpsk3-power-boost-voltage-mode-control
Digital control loop implementation of a simple voltage mode controller regulating the output voltage of an asynchronous boost converter
UttamBasu/egt_background_blur
Background blur for Ensemble Graphics Toolkit
UttamBasu/ESP8266
ESP8266 examples and toolchain setup
UttamBasu/Gate-Human-counter-using-IR-and-Arduino
UttamBasu/GPS-with-using-Arduino
UttamBasu/KitProtocol_Parser
The Kit Protocol promotes flexibility for applications that need to communicate with Kits, Test Boards, and “Talker” boards of various kinds.
UttamBasu/kitprotocolparser_projects
This repo provides reference implementation of host project using KitProtocol Parser. The firmware available here is built based on Microchip Crypto Auth Trust Platform (DM320118) board.
UttamBasu/ml-samd21-iot-imu-data-logger
Data logger firmware for the SAMD21 ML Eval Kit (SAM-IoT + MikroE IMU2/IMU14 Click Board)
UttamBasu/ml-samd21-iot-sensiml-gestures-demo
Gesture recognition demo with SensiML and the SAMD21 ML Evaluation Kit
UttamBasu/mu-wfi32-ota-updates
Microchip University Class material for WFI32 OTA class
UttamBasu/pic18f16q41-cnano-data-streamer-driver-mplab-mcc
Data Streamer Driver use-case to graph variables in the Data Visualizer. This use-case demonstrates the use of a sendflag, which controls when a Data Streamer frame update should be sent to the Data Visualizer.
UttamBasu/pic18f47q10-adc-computation-modes-mplab
This example is developed using PIC18-Q10 family MCU and Curiosity High Pin Count development board. The example highlights the basic, average, burst average and low-pass filter computation modes of PIC18F47Q10 MCU 10-bit ADCC peripheral.
UttamBasu/pic18f47q10-adc-dc-motor-with-touch-interface-mplab
This demo is developed using PIC18-Q10 family MCU and Curiosity Nano development board. The demo demonstrates the usage of ADCC with hardware CVD technique and PWM peripherals of PIC18F47Q10 MCU to control DC motor through capacitive touch interface.
UttamBasu/pic18f47q10-adcc-rgb-led-control-using-touch-sensors
This example is developed using PIC18-Q10 family MCU and Curiosity Nano development board. The example demonstrates LED brightness control and sleep implementation using CIPs of PIC18F47Q10 MCU and through mobile android application.
UttamBasu/pic18f47q10-clc-gray-code-decoder-mplab
h3. This demo is developed using PIC18-Q10 family MCU and Curiosity Nano development board. The demo realizes a Gray code decoder using CLCs of PIC18F47Q10 MCU.
UttamBasu/pic18f47q10-clc-vending-machine-mplab
This demo is developed using PIC18-Q10 family MCU and Curiosity High Pin Count development board. The demo realizes a vending machine through a 3-state Finite State Machine, by using CLCs and other Core Independent Peripherals(CIPs) of PIC18F47Q10 MCU.
UttamBasu/pic18f47q10-pwm-led-control-using-mobile-app-through-ble
This demo is developed using PIC18 Q10 family MCU and Curiosity High Pin Count board. The demo highlights implementation of LED dimming with PWM and timer modules and sleep wake-up with WWDT timeout/IOC event, through mobile app and BLE interface.
UttamBasu/pic24-dspic-can-canfd-bootloader
CAN and CAN-FD bootloader example using the ISO-15765-2 CAN transport layer for the PIC24 and dsPIC product lines.
UttamBasu/pic24f-rn4678-ble-mcp2518fd-can
This example code demonstrates how to interface a PIC24F MCU with a RN4678 Bluetooth module and MCP2518FD external CAN FD controller using UART and SPI peripherals respectively
UttamBasu/STM32duino-bootloader
Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE
UttamBasu/ZL3805x_6x-Example-Host-Driver
ZLS3805x_6x access over SPI Example Code