VoronDesign/Voron-Documentation

Issues

• Error on Voron V2 - Manta M8P Wiring

  #426 opened 3 months ago by dr-vincenzo
  0

• Require tach fan on all new kits

  #423 opened 4 months ago by Carlsans
  4

• neopixel connection points to wrong connector on SKR-Pico Image

  #420 opened 5 months ago by eefweenink
  0

• Links not working on /community/howto/EricZimmerman /SlicerAndPrintStart.md

  #417 opened 7 months ago by jaseiffert
  4

• relative_reference_index in Bed Mesh with Relative Reference Index guide is obsolete

  #416 opened 8 months ago by Tam-Lin
  3

• On initial tuning, not sure what to do during Z offset adjustment

  #412 opened 8 months ago by Tam-Lin
  0

• potential bed crash with community/howto/clee/sensorless_xy_homing.md

  #410 opened 9 months ago by tomlikesrocks
  0

• Website: build/startup: Motor-Check make it clear.

  #409 opened 10 months ago by calmarc
  0

• Backing up printer configuration files to GitHub does not fully work

  #406 opened a year ago by jaseiffert
  6

• Grease clarifications on sourcing_faq.md

  #402 opened a year ago by DavidCC00
  0

• Automated Klipper updates skip menuconfig!

  #389 opened a year ago by LAP87
  0

• Online startup guide doesnt mention how to move the bed up for the z endstop calibration.

  #386 opened a year ago by Faenum
  0

• Z Belt Tensioning section for V2 needs clarification

  #380 opened a year ago by alidaf
  0

• Assembly_Manual_2.4r2 -> rev date 20230704 -> page 3 "TABLE OF CONTENTS" no link to relative page

  #378 opened a year ago by alexsfa74
  0

• Fluiddpi is no longer maintained

  #327 opened a year ago by BlackNet
  0

• Easier Klipper flash procedure for BTT Octopus.

  #360 opened 2 years ago by cmdremily
  3

• Belt Tension shouldn't be buried in Secondary Tuning

  #370 opened a year ago by mizz141
  0

• Files are folded on case-insensitive filesystems

  #363 opened 2 years ago by jordanhubbard
  1

• [Firmware] Comment about RGB and RGBW not able to be mixed in same chian is no longer accurate

  #357 opened 2 years ago by ChaosBlades
  0

• Relative reference calculation in secondary printer tuning is incorrect

  #355 opened 2 years ago by Michael-Jacobsen
  4

• Manual: Hall Effect Endstop not applicable?

  #348 opened 2 years ago by MallocArray
  0

• VoronDesign.com Build Manual Current links to V0.1

  #349 opened 2 years ago by mwmason
  0

• Improve documentation on how to get the serial path

  #351 opened 2 years ago by Drachenkaetzchen
  1

• Initial startup Switchwire Motor Configuration Z direction is inverted

  #340 opened 2 years ago by sree314
  2

• Suggestion for addition (sda1 does not always apply) > skrPico_klipper.md

  #334 opened 2 years ago by livinhack
  0

• Link to sensorless homing guide is broken on docs.vorondesign.com

  #332 opened 2 years ago by EDGe-17
  3

• Z Offset Adjustment Section in https://docs.vorondesign.com/build/startup/

  #324 opened 2 years ago by biggerfish71
  1

• V.02 endstop update needed on docs.vorondesign

  #331 opened 2 years ago by TxBillbr
  1

• Missing explanation for component removal on mini12864 displays

  #329 opened 2 years ago by manisto
  2

• missing klipper firmware configuration to flash the firmware for the Octopus Pro H723

  #322 opened 2 years ago by DerksDesign
  0

• Startup guide invert stepper part should warn user earlier

  #320 opened 2 years ago by ironhalik
  0

• Documentation Accessibility - Color Scheme

  #316 opened 2 years ago by JoeCalvert
  1

• Initial Startup Docs - Bed locating (V1, Trident, Legacy) X & Y switched

  #300 opened 2 years ago by spitzbirne32
  0

• SKR Pico

  #118 opened 3 years ago by 0xUnkn0wN
  1

• Klipper config in Chamber temp doc requires updating

  #137 opened 3 years ago by tempestaz
  1

• Trident Printed Parts Reference is outdatet

  #289 opened 2 years ago by Markus-1984
  0

• Fix Link ....

  #279 opened 3 years ago by 4noxx
  2

• Misleading information on website, material section.

  #277 opened 3 years ago by JFD-Mtl
  0

• Bed Leveling needs to updated for SW and Trident

  #273 opened 3 years ago by Drachenkaetzchen
  0

• PL-08N2 easily modified for compatibility with new tool head carriage. 2.4R2 - Trident...going forward.

  #130 opened 3 years ago by PhilBaz
  2

• V2 description update

  #187 opened 3 years ago by bdbell
  1

• Uncomment in [gcode_macro G32] missing from Software Configuration docs

  #184 opened 3 years ago by jullit31
  2

• INITIAL START UP - BED LEVELING

  #163 opened 3 years ago by 0ut-of-soul
  0

• Startup guide shouldn't advise users to invert enstop pins

  #145 opened 3 years ago by cbc02009
  0

• Add base configuration for BTT Octopus in "Software Configuration" page

  #116 opened 3 years ago by Teslafly
  2

• v2 Octopus Wiring - A motor is referenced as "gantry left" and B as "gantry right"

  #122 opened 3 years ago by Jaans
  0

• 404 error in printer.cfg_changes.md link "build docs"

  #109 opened 3 years ago by ellensp
  0

• Change guidance on BTT mini12864 only remove components R1, and C6,

  #125 opened 3 years ago by PhilBaz
  0

• Consider recommending Military surplus as a source for cheap PTFE wire

  #102 opened 3 years ago by Wdfitzpat007
  0

• Initial Startup Guide - Problems with setting (0,0)

  #83 opened 3 years ago by conlank
  1