Issues
- 5
BLTouch not triggering Z axis stop
#18 opened by JayJay6850 - 0
How do I switch the UI language to Chinese?
#31 opened by plutosherry - 1
No thermal runaway protection
#30 opened by Lucidology - 4
- 0
installation
#28 opened by Rajadams83 - 2
mesh leveling woth stay active
#25 opened by rudo122 - 0
custom firmwar
#27 opened by rudo122 - 0
Print Tune overtemp error on temp changes.
#26 opened by eyearot - 0
Screen Freeze After Unload Load
#24 opened by opensourcefan - 0
- 1
Overtemp error
#22 opened by skaface - 2
- 0
- 0
- 0
Extrude without preheating
#19 opened by timfollowes - 1
Flow rate does not save
#17 opened by masterno12 - 0
[FIXED] Heating Failed Restart Required
#14 opened by AnshumanFauzdar - 0
new flash doesnt work
#16 opened by jahnj0584 - 1
Creating "New Manual Mesh"
#13 opened by IIREDII - 0
Issue on pause - OctoPrint
#12 opened by AnshumanFauzdar - 5
- 4
- 5
Octoprint - some blobs/zits
#9 opened by whiney1 - 4
- 1
- 3
Heater times out
#5 opened by craigdavidfox - 1
Thermal Runaway
#7 opened by Shadowtrance - 0
CPU LED not on when running
#3 opened by Mik-S-UMS - 0
Results after 24 Hour Printing
#6 opened by AnshumanFauzdar - 1
No resume print after Power Failure
#4 opened by tomlai-git - 2