Issues
- 0
OceanHR4 connection issue
#241 opened by s910324 - 0
Ethernet Support for HDX
#240 opened by lovelesh-mis - 0
- 40
- 5
Support for SR6 / HR6
#224 opened by tberezowski - 8
Drivers Dont have valid signatures
#221 opened by AlonsoUriarte14 - 4
USB2000 and some Flame S error at initialization due to fpga firmware version register check
#226 opened by dbhatman - 1
Overflow, still alive and well
#204 opened by drmcnelson - 5
Install on raspberry pi
#215 opened by trautsned - 2
Basic SR2 support
#217 opened by avedillopy - 1
- 1
Extract cseabreeze into its own module
#186 opened by ap-- - 2
Flame-S in version 2.4.0 pyseabreeze and trigger mode
#202 opened by waldowda - 1
- 3
Edge Trigger Issue Continues
#200 opened by waldowda - 4
- 3
- 0
Rewrite Transport to use bMaxPacketSize
#190 opened by ap-- - 10
ADC1000 error with external interrupt
#193 opened by drmcnelson - 1
USB2000 Issue reading intensities
#197 opened by jjcamus - 5
ADC1000-USB with SD2000 not detected
#112 opened by drmcnelson - 20
Seabreeze and SR4 Spectrometers
#185 opened by fieterovich - 2
Read gpio with raw_usb_bus_access?
#161 opened by mabaquero - 1
C seabreeze doesn't report firmware version
#175 opened by bensoloway - 1
Ocean Optics Multi-Channel Spectrometry Oddities
#116 opened by evantaylor - 3
Problem with set_integration_time, the spectrometer doesn't wait for spectrum acquisition.
#177 opened by josue300earth - 5
- 2
Buffer dtype mismatch error in write_calibration
#159 opened by waterfallpit - 3
i cant turn the lamp on
#158 opened by chesse20 - 0
- 6
Installing seabreeze using "--without-cseabreeze" errors
#150 opened by ap-- - 12
Version 2.0.1 crashes on read
#148 opened by drmcnelson - 8
Python cseabreeze works on Mac but not on Windows
#147 opened by hari-pad - 1
pip install seabreeze fails in fedora 35
#145 opened by drmcnelson - 1
type annotations for seabreeze
#137 opened by ap-- - 3
src/libseabreeze/src/api/seabreezeapi/DHCPServerFeatureAdapter.cpp:64:16: error: template argument 1 is invalid
#139 opened by greyltc - 3
Subclassing Spectrometer throws error
#140 opened by jtmbeta - 3
Flame-S Edge Trigger Mode Didn't get into 1.3.0?
#126 opened by waldowda - 0
pyseabreeze: implement gpio feature
#136 opened by ap-- - 4
Warning message in seabreeze_os_setup should state that it's a known error
#114 opened by LMSC-NTappy - 2
ci: automate pushing wheels to test.pypi and pypi
#135 opened by ap-- - 6
Unable to read register from Flame-T
#134 opened by stepandr47 - 7
FLAMES sporadic data transfer error
#129 opened by joellama - 1
Transimitting raw commands to FLAME-NIR via RS232
#128 opened by ap-- - 8
Getting temperature of FLAMES Spectrometer
#119 opened by joellama - 4
data is just noise on usb4000
#127 opened by chesse20 - 3
Module not using sensitivity calibration
#122 opened by juliowissing-iis - 1
QE Pro -- data transfer error
#123 opened by dpmchugh - 4
- 2
maya2000 driver issue
#113 opened by isikfurkan