arduino/ArduinoCore-zephyr

Issues

• GIGA Shield: Display Libraries

  #92 opened 7 months ago by KurtE
  11

• Initial Portenta C33 testing using 0.3.0

  #93 opened 7 months ago by mjs513
  9

• [Feature] Add EEPROM library

  #97 opened 7 months ago by lyusupov
  0

• Support for OPTA family

  #34 opened 10 months ago by sstaub
  3

• Support Portenta C33

  #80 opened 8 months ago by facchinm
  24

• 0.3.0 Regression testing (GIGA and NANO 33 BLE SENSE v2)

  #91 opened 7 months ago by mjs513
  2

• Nano 33 BLE: Threads not working on nano 33 ble sense v2

  #53 opened 9 months ago by mjs513
  12

• GIGA: C++ Zephyr Hello World Sample produces multilple errors.

  #28 opened 10 months ago by mjs513
  5

• Portenta H7 LITE: SDRAM BUS FAULT / UNALIGNED ACCESS(USAGE FAULT)

  #74 opened 9 months ago by mjs513
  4

• Portenta H7 using 4.1.0-rc2 loses USB after updating firmware

  #84 opened 7 months ago by mjs513
  4

• What should be checked in with a Pull Requesta?

  #88 opened 7 months ago by KurtE
  2

• Giga R1 - USB fails after flashing bootloader

  #86 opened 7 months ago by timonsku
  3

• How to build Zephyr toolchain

  #83 opened 8 months ago by mjs513
  0

• Portenta H7: ADC Implementation

  #76 opened 9 months ago by mjs513
  3

• Portenta H7: Trying to add the Camera/GC2145 support

  #78 opened 8 months ago by KurtE
  25

• Giga R1: GC2145 Issues

  #81 opened 8 months ago by mjs513
  3

• H7/GIGA QSPI experiments and Questions

  #79 opened 8 months ago by mjs513
  1

• Portenta H7: Pin Table - How complete should it be? Compatible with MBED version?

  #68 opened 9 months ago by KurtE
  11

• Nano 33 BLE Sense - Wire1 not fully initializing the hardware (Pull up and enable devices)

  #51 opened 8 months ago by KurtE
  10

• GIGA: after merging previous changes: SPI1.transfer hangs board

  #64 opened 8 months ago by KurtE
  4

• Tools->Mode->Debug appears to be stuck on

  #33 opened 10 months ago by KurtE
  2

• Nano 33 BLE: SPI Max Freq is 8 Mhz?

  #66 opened 9 months ago by mjs513
  1

• Nano 33 BLE: micros() function does not work

  #60 opened 8 months ago by mjs513
  2

• How to decode a fault address?

  #52 opened 9 months ago by KurtE
  2

• Nano 33 BLE sense v2: WIRE1 not defined

  #48 opened 8 months ago by mjs513
  0

• GIGA: Serial.flush() will hang if the Serial monitor is not connected.

  #35 opened 10 months ago by KurtE
  1

• Support for ESP32

  #54 opened 9 months ago by DrStS
  1

• Sketch upload fails on Nano 33 BLE Sense rev2

  #59 opened 9 months ago by timberwolf-toao
  5

• Portenta H7: Setting up LittleFS to work on QSPI

  #77 opened 9 months ago by mjs513
  1

• Portenta H7 PWM: Not sure of the Zephyr capabilities/rules

  #75 opened 9 months ago by KurtE
  5

• Portenta H7 Lite: Std lib atan2 causes a Undefined in Symbol Table

  #73 opened 9 months ago by mjs513
  0

• Portenta H7 Lite: BMI270 library causes a BUS FAULT on Wire Ports

  #72 opened 9 months ago by mjs513
  0

• Nano 33 and Giga: BMI270/BMM150 Compiles but Looses Com Port after Upload

  #69 opened 9 months ago by mjs513
  3

• Portenta H7: MBed Serial port compatability?

  #70 opened 9 months ago by KurtE
  0

• Debugging issues - With the merge of all of the recent changes

  #58 opened 9 months ago by KurtE
  4

• Nano 33 ble: SDfat issues on SPI - Whats working and whats not. [SOLVED: HW MAX SPI CLOCK = 8 MHZ!!!!!)

  #63 opened 9 months ago by mjs513
  2

• Nano 33 ble SPI fails after BMI270 Connected

  #56 opened 9 months ago by mjs513
  5

• GIGA: SdFat Bench example fails to load and run correctly

  #24 opened 10 months ago by mjs513
  16

• Zephyr User Threads (define/start) don't seem to be working. (Multithreading)

  #37 opened 9 months ago by mjs513
  18

• NANO arduino_nano_header: connector pin issues.

  #55 opened 9 months ago by KurtE
  10

• NANO: using floating point crashes the processor.

  #57 opened 9 months ago by KurtE
  4

• Nano 33 Sense v2: I2c Scanner running for Wire only acting strangely

  #49 opened 9 months ago by mjs513
  6

• analogRead and analogReadResolution

  #36 opened 9 months ago by KurtE
  1

• GIGA: analogWrite to DAC pins (A12, A13) does not appear to be implemented.

  #38 opened 10 months ago by KurtE
  2

• State of the builds? Should we be running build_all.sh?

  #44 opened 10 months ago by KurtE
  2

• QUESTION on nano sense 33 ble v2

  #45 opened 10 months ago by mjs513
  4

• micros() rollover does not work for computing delta times.

  #25 opened 10 months ago by KurtE
  1

• GIGA: C++ Zephyr Sychronization Sample Sketch Compile Error

  #29 opened 10 months ago by mjs513
  1

• GIGA: Enabling BT in Core fails to compile.

  #27 opened 10 months ago by mjs513
  3

• SDRAM, malloc and/or buffer defined in sketch, or in device tree?

  #26 opened 10 months ago by KurtE
  1