Pinned issues
Issues
- 12
Vitoconnect passthrough
#87 opened by challo2018 - 2
How stable is V3?
#107 opened by TheCutter - 7
VitoWiFi 2.0 Debug funcionality
#84 opened by LFrank2021 - 4
- 15
Implement GWG protocol
#62 opened by Arty68 - 21
No Data with ESP8266, but data with ESP32
#68 opened by Kasper027 - 3
Blocking after 6 hours
#77 opened by GnomiBerlin - 9
Errors on high MQTT request rate
#78 opened by GnomiBerlin - 7
Wemos D1 mini / Serial-Pins
#80 opened by lsrs7 - 1
EOL for message "queue full"
#104 opened by j0ta29 - 1
Compilation error at Datapoint.hpp
#103 opened by j0ta29 - 1
Return type of _readDatapoint and _writeDatapoint
#102 opened by j0ta29 - 3
- 1
Cannot compile
#99 opened by alfredolo72 - 7
Feature request: sniffer example
#32 opened by s0170071 - 3
protocol blocked after error
#48 opened by JPAPLOUZ - 3
Wrong logging output
#41 opened by s0170071 - 5
interface with Open Energy Monitor
#49 opened by Pukkahq - 4
KW runs into Timeout
#53 opened by Empor-co - 11
ESP 8266 with Loxone SmartHome
#61 opened by katzendrama - 2
V1: protocol blocked after invalid DP address
#67 opened by s0170071 - 5
Circuit Example
#64 opened by jnsw - 4
Temperature-Datapoint with 3 Bytes
#69 opened by Kasper027 - 4
Serialmonitor "chksum 0x2d"
#75 opened by Trainerr - 2
Example for DPRaw
#81 opened by Sirmike2 - 1
ack followed by nack timeout.
#40 opened by s0170071 - 16
Datatypes request
#37 opened by s0170071 - 3
Up-to-date library version on PlatformIO
#88 opened by j0ta29 - 0
Queue full without any connection
#83 opened by LFrank2021 - 4
- 30
- 5
VitoWiFi.readDatapoint() only on MQTT request
#74 opened by GnomiBerlin - 1
DPCoP and group
#72 opened by GnomiBerlin - 4
"Betriebsart" as example delivers always "0"
#71 opened by GnomiBerlin - 5
ESP32 Communication issue
#70 opened by SReub - 2
Please tell me the request address V100 boiler pump in operation or not / It is not in the list of addresses of Viessmann-adresses
#66 opened by dima-357 - 5
[OT] WifiPrinter
#63 opened by sude22 - 12
Enhancement to Wifi-commands
#45 opened by andreasloe - 11
Cannot write (rawOptolink)
#55 opened by ondras12345 - 4
- 8
Callback with old value after write datapoint
#52 opened by maihacke - 2
Read/Write buffer: fixed size
#50 opened by kollera - 2
Contradiction in data point list
#44 opened by andreasloe - 10
Optolink remains busy after first write
#43 opened by s0170071 - 3
need loop() delay of 100ms
#42 opened by s0170071 - 17
Feature request: value factor
#30 opened by s0170071 - 2
Exception29 when interface is disconnected
#36 opened by s0170071 - 22
P300 does not recover from "nack, comm error"
#29 opened by s0170071 - 3
Optolink connection failed
#33 opened by JueFri - 7
Exception 28
#28 opened by s0170071