brianc118/MPU9250

Issues

• MISO is not working with TinyTile and MPU9250

  #20 opened 6 years ago by GeorgeMcAlistar
  5

• Not an issue but a confirmation: STM32

  #24 opened 6 years ago by Kralj-Lir
  0

• Can't read the mag value

  #23 opened 7 years ago by MitalPattani
  2

• Magnetometer reading (0,0,0) - basically not connected

  #4 opened 8 years ago by brianc118
  6

• can't write value to config register

  #22 opened 7 years ago by fengrenai
  0

• Miso Mosi pins not defined in library

  #21 opened 7 years ago by Devanshi15
  3

• SPI pin

  #19 opened 7 years ago by Manujaya94
  0

• Error when compiling Basic_SPI.ino / Arduino mega SDK

  #18 opened 7 years ago by Manujaya94
  2

• Read magnetometer with SPI

  #16 opened 7 years ago by clemaitre58
  1

• yet aanother question on spi with the magnetometer

  #17 opened 7 years ago by aster94
  3

• Missing variable assignment in constructor

  #1 opened 9 years ago by danterp
  3

• Magnetometer Doesn't Work (modified for Arduino 1.6.5)

  #2 opened 9 years ago by danterp
  4

• setSCK function

  #3 opened 9 years ago by ijunglee
  6

• porting to PIC

  #5 opened 8 years ago by abstruse123
  2

• [Calibration]Gyro and Accelermeter offset

  #6 opened 8 years ago by YanJenHuang
  2

• Possible to use on NodeMCU/ESP8266?

  #7 opened 8 years ago by Traste
  1

• AK8963 connection check always fails but there is valid magnetometer data

  #8 opened 8 years ago by danterp
  2

• Unstable Magnetometer Readings

  #9 opened 8 years ago by xmlms
  1

• Disable I2C slave mode bus during initialisation

  #11 opened 8 years ago by brixworth
  2

• Line 118 MPU9250.cpp

  #12 opened 8 years ago by radioelf
  3

• randomstuff[] variable only necessary due to indexing issue

  #14 opened 8 years ago by jdw-creare
  1

• add filtering

  #15 opened 7 years ago by aster94
  4

• reserved bit

  #10 opened 8 years ago by DaveBuckingham
  0