bruprescott's Stars
Nevcairiel/LAVFilters
LAV Filters - Open-Source DirectShow Media Splitter and Decoders
iliasam/OpenSimpleLidar
Open Source scanning laser rangefinder
simplefoc/Arduino-FOC
Arduino FOC for BLDC and Stepper motors - Arduino Based Field Oriented Control Algorithm Library
mileyan/pseudo_lidar
(CVPR 2019) Pseudo-LiDAR from Visual Depth Estimation: Bridging the Gap in 3D Object Detection for Autonomous Driving
rodizio1/EZ-WifiBroadcast
Affordable Digital HD Video Transmission made easy!
makers-for-life/makair
🫁 The world's first open-source ventilator tested on human patients. Mass-producible at a low cost (~2000€).
iliasam/OpenTOFLidar
Open Source TOF Lidar
beedotkiran/Lidar_For_AD_references
A list of references on lidar point cloud processing for autonomous driving
Kitware/LidarView
LidarView performs real-time reception, recording, visualization and processing of 3D LiDAR data. This repository is a mirror of https://gitlab.kitware.com/LidarView/lidarview.
RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license. Repository tracks all mechanical, electrical and systems design, software, requirements and regulatory documentation.
hc625ma/simchair_models
Simchair MKIII 3D printable models repository
rgrokett/RaspiAsteriskGoogle
Integrating Asterisk with Google Assistant Voice Service on a Raspberry Pi Zero using AGI
sharandac/powermeter
A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors
mpater/bldc-BMS
Battery management system for a VESC
makers-for-life/makair-control-ui
🖥 [Software] GUI application that uses the telemetry protocol to control the ventilator.
MartinD-CZ/Lithium-Battery-Utility-Board
A small board containing charging, protection, load sharing and voltage boost circuitry.
gwangyu-lee/iOS-LiDar-Scanner-Realtime-with-TouchDesigner
An example application using a LiDar sensor on iOS with TouchDesigner.
makers-for-life/makair-firmware
🧠 [Software] Firmware for the MakAir microcontroller. The brain of the ventilator.
Crowdsourced-Ventilator-Covid-19/crowdsourced-ventilator-covid-19
makers-for-life/makair-motherboard
🔌 [Electronics] Motherboard PCB design and component specifications for the MakAir.
ConstantRobotics/VISCA_Protocol_Parser
VISCA protocol (Sony Corporation trademark) message parser
PubInv/covid19-ventilator-validation-tests
A collection of validation test for for emergency covid19 ventilators (clinical usability and suitability as per RMVS)
sglow/freeflow
Hardware & software design of an air flow meter intended to help medical personnel share ventilators if necessary
mechatroniks-git/FastTrackTidalVolumeMeter
pimbongaerts/altimeter
Underwater sonar/USBL interface for photogrammetry surveys. PCB design files and Arduino code.
costassoler/Archimedes
Control software for RPi 3B Underwater Drone (Model C) (Python 3)
Judoguy12/4-way-ventilator-splitter
Airflow splitter to connect four patients to the same ventilator: Proposal https://docs.google.com/document/d/1WbaJ5lhCMrui6hDj-EqaMEB5Ymmw-CQgvQznhYMCw9w/edit?usp=sharing
lilcommieblyat/Teensy-Rocket-Flight-Computer-PCB
Provides mid-sized(60-100mm diameter)rocket with motion sensing, GPS tracking, and flight data logging capabilities.
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve
bruprescott/OpenCTD
The OpenCTD is a low-cost, open-source CTD for researchers and citizen scientists.