rodizio1/EZ-WifiBroadcast

Issues

• I want to use it for FPV racing drones

  #246 opened 7 months ago by 0Ut5kWDaVQPfO
  0

• 4

  #245 opened 8 months ago by AdithyanA2005
  0

• We use GoPro4 to connect to the raspberry pie 3B via the B101. The transmitter sets the resolution at 1080p 30fps. the video delay at the receiver is about 2 ~ 3 seconds. Why?

  #198 opened 6 years ago by SnailSnake
  7

• 1.6RC6 release image doesn't boot on RPI Zero 2 W

  #242 opened 3 years ago by lukolszewski
  2

• RPi 3b + Ar9271 low bandwidth on v5 kernel.

  #243 opened 3 years ago by lukolszewski
  1

• TP-Link v3 not recognized

  #232 opened 5 years ago by bpjdons
  2

• Joystick buttons

  #219 opened 5 years ago by Howie9600
  2

• Strong Video Noises

  #241 opened 3 years ago by PIONNER-cmd
  1

• Use of two cameras

  #240 opened 3 years ago by PIONNER-cmd
  1

• Mavlink RC with Video

  #239 opened 3 years ago by Mas313
  0

• IDE

  #238 opened 4 years ago by cruiseou
  0

• Huge delay in RC control

  #237 opened 4 years ago by F33RNI
  0

• Boot Partition Needs Updating

  #236 opened 4 years ago by TheMindVirus
  0

• Raspberry Pi 4

  #225 opened 5 years ago by aaxbas
  5

• LTE support

  #228 opened 5 years ago by promistrio
  1

• EZWFB not booting in raspberry pi 3 A?

  #233 opened 5 years ago by fpgasdr
  2

• EZ-WiFiBroadcast on NVIDIA Jetson TX2

  #199 opened 6 years ago by GiraffeRage
  5

• network stream and EZ-WifiBroadcast

  #231 opened 5 years ago by V0rt
  0

• (Issue) Video stream is not re initiated

  #230 opened 5 years ago by kmieloszyk-luxoft
  0

• (Feature Request) OSD visible on rtp stream

  #229 opened 5 years ago by calkoe
  0

• EZ Wifi Broadcast with Navio2? Would love to hear if anyone has accomplished this.

  #221 opened 5 years ago by Mysnomer0
  10

• Relay Mode & Control over EzWifibroadcast

  #227 opened 5 years ago by Lootgeier
  0

• AWUS036ACH came with USB 3.0 not working.. HELP

  #226 opened 5 years ago by johaninpika
  0

• why GroundPi is incompatible with Pi1 B+？

  #224 opened 5 years ago by hjchjcjh
  1

• whether i can use usb camera

  #223 opened 5 years ago by mikenie
  1

• Transmitting RPI Screen to Ground Pi instead of camera

  #222 opened 5 years ago by Brent1798
  0

• Please tell me setting wifi dual band

  #220 opened 5 years ago by parisnet
  0

• Stick driven menus

  #218 opened 5 years ago by JamesCordell
  0

• Raspberry pi 4 tests

  #217 opened 5 years ago by JamesCordell
  0

• R PI zero not detecting Alpha AWUS036NEH

  #216 opened 5 years ago by JamesCordell
  2

• External GS won´t get parameters

  #213 opened 5 years ago by msergiu80
  12

• Ethernet not working

  #214 opened 5 years ago by Howie9600
  1

• How to receive video directly from airPi without groundPi?

  #215 opened 5 years ago by littleggghost
  0

• Mavlink Issues

  #211 opened 5 years ago by Howie9600
  3

• Barometric altitude does not display on OSD

  #208 opened 6 years ago by flyingw88
  1

• px4 support

  #212 opened 6 years ago by msergiu80
  0

• Flysky i6 ppm, please help

  #210 opened 6 years ago by msergiu80
  0

• Rtsp broadcast video.

  #202 opened 6 years ago by marcoemanuelecocco
  1

• Custom mavlink message

  #209 opened 6 years ago by Davidsastresas
  0

• HELP please, pi Zero work only with 1.5 ?!

  #206 opened 6 years ago by DomenicoPatella
  4

• Working with SPI display

  #207 opened 6 years ago by krzysztofkuczek
  0

• if all the bandwidth is used to transfer data (do not transfer images), how much bandwidth can be achieved?

  #205 opened 6 years ago by marseric
  0

• OSD off? diversity or more antennas?

  #204 opened 6 years ago by mathiasseyfert
  4

• Is it possible to send 1-2 Mbit/s data stream from ground to air?

  #203 opened 6 years ago by MikeStros
  0

• WFB 2.0

  #200 opened 6 years ago by maniranjanojha
  1

• Video files above 4GB not saved

  #201 opened 6 years ago by rodizio1
  1

• Add support for manual selection of Uplink and R/C dongle

  #197 opened 6 years ago by rodizio1
  1

• OSD infos home distance/position (and possibly others) reset on OSD restart (when connecting secondary display for example)

  #195 opened 6 years ago by rodizio1
  1

• Check if bi-directional telemetry through groundPi serialport is possible

  #196 opened 6 years ago by rodizio1
  0

• Microhard PX2 integration

  #194 opened 6 years ago by hug0stiglitz
  1