ch32-rs/wlink

Issues

• "Invalid payload length" on WCH-Link CH549 at `ProbeInfo` response payload

  #68 opened a month ago by rowanclarke
  0

• 'wlink regs' resumes the CPU

  #65 opened 3 months ago by OpusElectronics
  1

• macOS x86 is nightly build is really Arm ..

  #63 opened 4 months ago by Paulo-Ferreira-ISEP
  1

• wlink flash hangs when trying to reconnect serial console after reset

  #60 opened 5 months ago by reinauer
  2

• Flash Program

  #47 opened 8 months ago by dominic-nhat-ng
  2

• Minor doc update for ChipUID command response

  #58 opened 5 months ago by cw2
  0

• 似乎在连续写入两块不同的非零等等区域时会有问题？

  #56 opened 5 months ago by kaidegit
  2

• Error: USB error: Entity not found

  #57 opened 6 months ago by Censlab
  2

• [FR] Add more api to help use it as a library to flash chips

  #55 opened 6 months ago by kaidegit
  0

• TODO: Replace rusb with nusb

  #53 opened 6 months ago by andelf
  0

• Feature Request: Upgrade WCH-Link firmware

  #42 opened 9 months ago by andelf
  4

• A flash command before issuing a status command fails with "pipe error"

  #52 opened 7 months ago by OpusElectronics
  1

• Misleading error message on error from Rusb

  #50 opened 7 months ago by pdietl
  1

• Faild to found entry on Windows OS

  #5 opened a year ago by tonyho
  6

• Disable Flash Protection not working?

  #46 opened 8 months ago by smaharj1
  3

• Feature Request: Read Protection

  #14 opened a year ago by gicking
  7

• Start address always be 0x00000000 when flashing a hex file?

  #43 opened 8 months ago by kaidegit
  3

• [feature request] download each block respectively when hex is not sequential

  #40 opened 8 months ago by kaidegit
  2

• "chip doesn't support power off erase" error for ch32v003

  #45 opened 8 months ago by thirstyone
  11

• write-mem seems not to be working?

  #44 opened 9 months ago by thirstyone
  3

• Official Windows Driver support

  #37 opened 8 months ago by andelf
  2

• SDI not working with WCH-Link v2.11 (WCH-LinkE-CH32V305)

  #41 opened 9 months ago by thirstyone
  8

• Add debugging via openocd

  #31 opened a year ago by mrx23dot
  3

• Erase time out is not enough sometimes

  #33 opened 10 months ago by andelf
  0

• New Chip: CH641

  #35 opened 10 months ago by andelf
  1

• TODO: Clear All Code Flash by NRST

  #26 opened a year ago by comato
  4

• Unsupported wchlink

  #27 opened a year ago by 9names
  7

• Protocol documentation of WCH-Link

  #30 opened a year ago by andelf
  0

• TODO: CH32L103 support

  #29 opened a year ago by andelf
  0

• TODO: CH643 support

  #22 opened a year ago by andelf
  1

• Set default chip type via configuration file?

  #25 opened a year ago by gerryqd
  1

• support switch between dual mode

  #3 opened a year ago by cjacker
  3

• Error: DMI Status Failed

  #24 opened a year ago by chihiro1234567
  3

• Failed to flash for ch32v003

  #23 opened a year ago by secext2022
  1

• TODO: CH32X035 support

  #19 opened a year ago by andelf
  1

• some more protocol decoding

  #20 opened a year ago by usbman01
  4

• TODO: CH592/CH591 support

  #21 opened a year ago by andelf
  1

• Error: DM Abstract comand error: Parity on CH32V307V-R1-1v0 board (CH32V307 VCT6)

  #16 opened a year ago by lennyerik
  6

• Program the processor without erasing whole chip?

  #17 opened a year ago by KurtE
  2

• Is there a way to unlock the flash of the different boards.

  #15 opened a year ago by KurtE
  2

• Unknown WCH-Link variant

  #13 opened a year ago by gicking
  5

• Update the command line "help" listing, please! :)

  #12 opened a year ago by DBRJ-A88
  2

• Flash address

  #8 opened a year ago by Schildkroet
  4

• HEX file support

  #9 opened a year ago by Schildkroet
  3

• wlink Linux 下无法识别 WCH-LinkE

  #6 opened a year ago by Liangdi
  4